Firewall configuration Ten tasks seven, firewall log management

Configuration tasks for firewalls seven

Log management for firewalls

1. Set the firewall time to Beijing time and the time zone name to Beijing.

2. speed up the time by 1 hours.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/5A/47/wKiom1T645bTmGsMAACPzp2s0AE889.jpg "title=" Picture 1.png "alt=" Wkiom1t645btmgsmaacpzp2s0ae889.jpg "/>

Figure 7. 2

3. Specifies that the NTP server address is 192.168.2.100, and the server is connected to the internal interface.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/5A/43/wKioL1T65MKSR2ocAADN-VQkQ14510.jpg "title=" Picture 2.png "alt=" Wkiol1t65mksr2ocaadn-vqkq14510.jpg "/>

Figure 7.3

4. enables log information, level 6, to be sent to the cache.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/5A/43/wKioL1T65NLAkDgcAADbMLkXyrU311.jpg "title=" Picture 3.png "alt=" Wkiol1t65nlakdgcaadbmlkxyru311.jpg "/>

Figure 7.4

5 . Establish a logging policy to send all error messages and warning levels to the console for messages related to IP(TCP/ IP detection messages).  

6 . Action: Save the buffer contents in Flash with the file name test.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/5A/43/wKioL1T65OeRiXe-AABjl3mS1hk228.jpg "title=" Picture 4.png "alt=" Wkiol1t65oerixe-aabjl3ms1hk228.jpg "/>

Figure 7.6

7 . Configure send log to syslog server , send level 3, use firewall name as identity. The server is located on the internal interface, with the address 192.168.2.99,and sent using the default port and protocol.  

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/5A/49/wKiom1T64-KgCkmTAAAvwUzIkCA698.jpg "title=" Picture 5.png "alt=" Wkiom1t64-kgckmtaaavwuzikca698.jpg "/>

Figure 7.7

This article is from the "Network" blog, be sure to keep this source http://zznetwork.blog.51cto.com/9398550/1618298

Firewall configuration Ten tasks seven, firewall log management