Floppy Disk (s) fail (40) how to disable

When the computer is started, floppy disk (s) fail (40) does not press the F1 key, the system does not start, the system starts normally after the press, and the system does not reload, the main reason is that there is a problem with the soft drive settings in the BIOS.

1. If you have a soft drive, check whether the soft drive connection is correct or damaged;
2. If there is no soft drive, or the soft drive is damaged, disable it in Bois.

The specific solution is as follows:

Press del to enter bios, move the cursor to standard CMOS features, move the cursor to drivea, press enter, select none, and press F10, press Y to save the settings, and then press Enter. There is also a soft Drive Controller. In the integrated peripherals, move the cursor in the same way, find the super IO Device (or: Io devices configuration), press enter, find the onboard FDC controller, press enter, select Enabled, after saving the settings in the above method, press enter to start the self-check and enter the system. At this time, the soft drive is blocked.