G13/Wildfire S/a510e link2sd tutorial, clean the installer to the memory card

In this tutorial, the mobile phone software link2sd is used together with the memory card partition software on the computer. The so-called memory card installation here is totally different from the built-in memory card installation in the system. One is the ext partition and the other is the FAT32 partition, which does not occupy the phone memory or the phone memory, but this part of memory is actually on the memory card, but the system is cheated. Is it dizzy ?? Let's look back at this sentence after reading the tutorial.
You need:
-Root permission
-The SD card is divided into two partitions. The first FAT partition is your standard SD card storage control. The second is used Program File Installation partition (but ext2, ext3, ext4, or FAT32/fat16 ). Note that both partitions are primary disks. In addition, ext4 is the largest ext format, but some rom is not very compatible with this partition. So the first step is the partition tutorial. The attachment contains the partition software and link2sd.apk.
I. Memory Card partitioning
You need to format the memory card in this step. Pay attention to the backup. For details, refer to the attachment tutorial.
2. Applications of link2sd
1. Install link2sd on your mobile phone.
2. If you are prompted to select the second partition system of the SD card, select ext2 used in the partition just now. OK
3. A permission request will be prompted later.
4. Restart the phone so that the phone system can mount the ext partition. Use the system restart function directly.
5. After restarting, start link2sd again. After loading the program list, we can move the program (user program, non-system program. Here, the flashlight is used as an example.
6. Open the flashlight in the link2sd program list and click Create connection below. After the prompt is complete, the program will be moved to the ext2 partition on the memory card.
OK, all the content is finished, but there are some things to emphasize.
1. The so-called link2sd connection maps the ext2 partition of the memory card to the memory space of the mobile phone. Therefore, the system still thinks that the program is installed in the memory of the mobile phone, therefore, when we install the program on the computer using the pea pod 91, we still need to choose the phone memory instead of the memory card (otherwise, we will install the program in the FAT32 partition of the SD card, in this way, the running speed is less than that of link2sd connected to the memory card ext2 partition)
2. The mobile phone settings are completely different from the memory card. You can move all programs back to the phone memory and connect them to the memory card using link2sd.
3. link2sd is only applicable to user programs and is powerless to system programs.
4. When you connect to your computer in disk mode, link2sd will not be affected by the program connecting to the memory card, because the computer will only load FAT32 partitions, and ext2 partitions will not be affected.
5. The program connected with link2sd theoretically does not occupy the phone memory space. At least it is smaller than the memory occupied by the mobile phone installed on the memory card (FAT32 partition) (for each program)
6. Do not unplug the memory card when the machine is started, or start the system after the memory card is removed. Otherwise, the system will load partitions without ext2. All Programs connected to the memory card will become invalid and must be re-installed.
7. You can also set Automatic Connection in settings to enable the newly installed program to automatically connect to the memory card.
Tutorial software .rar (708.03 KB)

Http://www.hiapk.com/thread-1810894-1-1.html

Known issues
In the 2.3 system, the Lib file cannot be associated after the device is restarted. Sometimes, 2.1 2.2 may also occur.