Gigabyte many new models motherboard installed XP system, there is a problem of mouse failure. In response to this problem, a lot of information, may be resolved by the following methods:
One: Bios modification method:
Take ga-b85m-d3v as an example to illustrate:
1, can be used, but need to set up in the BIOS.
2, specific as follows:
(1) in BIOS BIOS Features (BIOS function setting), set fast boot to: enabled;
(2) found below this page: USB support (USB device supported), change it to: Full Initial (all available)
(3) After saving the exit should be able to use.
If this method is used, then you can try the following methods:
Second: Remove the system USB device when the power saving shutdown
Open Device Manager and locate the Universal Serial Bus Controller:
650) this.width=650; "title=" 11.jpg "src=" http://s2.51cto.com/wyfs02/M01/7E/3F/wKiom1b6P_bArbUhAACXk26ARso283.jpg "alt=" Wkiom1b6p_barbuhaacxk26arso283.jpg "/>
Double-click the USB Root Hub to find power management and "V" to remove "allow the computer to turn off this device to save power".
650) this.width=650; "title=" 22.jpg "src=" http://s2.51cto.com/wyfs02/M00/7E/3B/wKioL1b6QGnTgTI4AABZBzxv8YE861.jpg "alt=" Wkiol1b6qgntgti4aabzbzxv8ye861.jpg "/>
If not, install Win7.
This article from "Guanlan computer | guanlan Computer Repair" blog, please be sure to keep this source http://guanlandiannao.blog.51cto.com/221600/1758100
Gigabyte B85M-D3V Motherboard Mouse Failure solution