Hard drive boot prompts verifying DMI Pool Data Error Resolution _ Hardware Maintenance

1. Try to restore BIOS default settings

A verifying DMI Pool Data error occurs when a new hardware is replaced or if the memory read or write parameter is set incorrectly, or if the hard drive mode setting is incorrect, try to restore the BIOS defaults, or optimize the BIOS settings as appropriate.

2. Hard drive Data Cable problem

Hard drive data cable quality is not good, easy to cause data transmission errors, data cable and hard disk or motherboard contact bad will also occur problems.

Check that the cable connection is intact or try to replace the data cable

3. Hard drive main boot area content is corrupted

The Verifying DMI Pool Data error occurs when the main boot area content of the hard disk is corrupted by a virus or other program and can be used

Fdisk/mbr to try to recover.

4. Hardware failure

Hard disk, motherboard hardware failure, or overclocking and so on will have problems, for this problem, it is recommended to use hardware elimination method to check where the problem appears, try to suspect the problem of hardware replacement to a new platform for more accurate confirmation
There's a problem with the boot plate! With the red leaves in the mountains, the hard disk partition diagnostic Tool to repair the guide on everything ok! I just solved the problem, so I came to tell my friends who are in trouble!