Hard drive can not install the Win7 system solution

Hard drive can not install the Win7 system solution

1, first of all, will WIN7 installation package to extract, with WinRAR, WinZip, 7Z, good pressure, soft disk pass, etc. can be decompressed, under normal circumstances, you download are the ISO format of the mirror;

2, copy these files to a non-system disk root directory, the system disk is the majority of C disk, and the root directory is a disk, such as the F-disk double-click after the interface, must not put into the folder!! It can be compared to whether there are these documents;

PS: The NT6 file can be temporarily ignored, the following will say the origin.

3, the following needs a software to help, is NT6HDD Installer (NT6 HDD Installer download chain: Http://pan.baidu.com/s/1dDehdKX Password: BGFA), Download and put the Win7 installation files before the root directory, that is, and Win7 installation files together and then run, will appear below the window, if your current system is XP can choose 1, if it is Vista or Win7 Select 2, we can see, we will understand, After the selection press ENTER to start installation, 1 seconds or so, after the restart system;

4, in the boot process will appear as follows interface, then select the new NT6 HDD Installer mode 1 option;

5, the following will begin installation;

6, a certain point that is now installed;

7, license terms;

8, here strongly recommend the choice of titration installation, that is, the second, the first upgrade will be very very slow;

9, here Select the lower right corner of the drive options (advanced);

10, if you want to install a dual system, you can find a system is not before the disk installation, if only want to use WIN7, so long format before the system disk (must be done before the system disk backup);

11, the following steps are almost always follow the prompts to complete the installation.