Hard drive detection can not pass the solution

Units in the Office of a common computer at the start of each boot, automatic hard drive detection, but in the detection of progress at 66% position when the detection operation can not be carried out, at this time also can not use the thermal boot function to reboot the system, must turn off the power to cold start. Now only in the System Start screen prompts to detect the hard drive at that moment, press any key on the keyboard in time to ignore the hard drive detection operation, and then log into the Windows system interface after performing any operation is normal. Then why is the system in the detection of the hard drive, hard drive detection can not be successfully passed it? Will it be hardware damage to the hard drive?

From the above description of the phenomenon, we estimate that the unit common computer hard disk is likely to have hardware damage, encountered this phenomenon when we first have to do is to quickly put the hard disk important data content, move to other relatively safe location. After doing the backup of the data, the next thing we need to do is to switch the system to DOS and execute the "fdisk/mbr" string command on the DOS command line to try to fix the soft faults in the hard drive. We can download and install some professional hard disk bad track detection tools, to carefully check the local hard drive is bad, if the hard drive is not found, the hard drive detection can not pass the phenomenon is likely to be caused by a logical failure, At this point we can only use the method is to find the corresponding brand of hard disk logic bad repair tool to restore the hard drive, I believe that such a hard drive detection can not be solved by the phenomenon.