Hard drive temperature is a normal number

The normal operating temperature of the hard disk is normal temperature between 40-50 degrees, and its working temperature limit should be less than 70 degrees. When the hard disk temperature reached about 100 degrees, the hard drive will be damaged caused by loss of data, serious damage to the hard drive. Under normal circumstances. The working temperature of the hard disk is 10-20 degrees higher than the indoor temperature, it may reach 60-70 degrees in summer, and only 30-40 degrees in winter. The normal operating temperature of the IDE hard disk is about 30-50 degrees.

The above data is theoretical, and the actual use will have a certain relationship, such as long time to read, store data, then the hard disk temperature will rise. As long as there is no frequent restart, panic and other phenomena, in the system does not appear in the case of error, we generally think that the temperature is normal. Laptops are not as cool as desktops, and may be slightly warmer than desktops.

Here are two hard disk temperature monitoring software, which we think may be able to open the temperature monitoring software when the hard disk temperature is high.

1, Golden Hill Guardian 3.0

1. First download Jinshan Guardian, open the Guardian main interface "Reload system" label,

2. Then switch to the "Hardware detection" function, automatically help you detect the current computer hardware device details and current motherboard temperature is how much, when your motherboard temperature reached a dangerous value, the temperature of the digital color will become more and more red.

2, Master Lu

After running the master, you can see a temperature monitoring, open you can see the computer including the motherboard, CPU, graphics and so on the temperature display. It also automatically alerts the user that a warning will be issued when the motherboard temperature is not normal.

What to do if the hard disk temperature is too high

When the hard drive temperature is too high, this is because the hard drive in the continuous reading and storage caused by the following ways we can reduce the read storage caused by the hard disk temperature too high.

1, through the right key into the task Manager to see the program to occupy the largest memory, you can end it. In general, antivirus software is frequently read and write hard disk. When there is no problem with the computer, we can turn off the anti-virus software, just open a firewall on the line.

2, the start-up of a random open program, in the new system will have many of the accompanying startup program, in the boot of these programs will also randomly open, so too many startup programs will lead to frequent read and write hard disk, this will also cause hard disk temperature too high. We can turn off all the unused. As follows:

1. Click on the lower left corner of the display to start, select Run, enter the "msconfig" command, click "OK" button

2. Open the System Configuration Utility window, switch to the Startup tab, remove the unwanted startup items below the check box, and then click OK.

3, may be caused by the virus, you can completely antivirus look.

4, can use the relevant software to optimize the computer, turn off some unnecessary procedures, such as Master Lu and so on.