New home internet needs a better ADSL router, put in the weak box, network for routers + 2 APs,
If the home is fiber-optic Internet may require the Pon interface router, hehe.
An enterprise router that supports command-line debugging is required, and Ar207v,600¥ is selected for price reasons.
The following is only a brief description of the ADSL dial-up network configuration, about Ac+ap set roaming configuration manual described more detailed, not listed.
In fact, ADSL dial is Pppoeoa, specific configuration reference manual can, here to supplement the manual is not the place.
#acl name atm0/0/0 2999 Rule 5 Permit
Rule for NAT
#dialer-rule dialer-rule 1 IP Permit
Rule for dial
#interface Dialer1 Link-protocol PPP PPP CHAP user USERNAMEFORADSL PPP chap password CIPHER PASSWORDFORADSL PPP pap local- User USERNAMEFORADSL Password PASSWORDFORADSL
///////************* input password manually, don ' t copy/paste. Please enter the password manually, please do not paste the password
PPP IPCP DNS admit-any PPP IPCP DNS request MTU 1440 TCP ADJUST-MSS 1460 IP address ppp-negotiate dialer user Arweb dialer Bundle 1 Dialer-group 1 Nat Outbound 2999
Dialer for PPPoE
#interface Vlanif1 IP Address 192.168.1.1 255.255.255.0 DHCP Select interface DHCP server Dns-list 202.103.24.68
VLAN 1 for client PC
#interface atm0/0/0 PVC 0/32 Map Bridge virtual-ethernet0/0/0
///////*************DSL Interface PVC, 0/32 for Wuhan
#interface virtual-ethernet0/0/0 pppoe-client Dial-bundle-number 1
Virtual Interface for PPPoE dial
#ip route-static 0.0.0.0 0.0.0.0 Dialer1
Default route
First, your ATM port is going to be activated.
<Huawei>dis int dialer1Dialer1 current state : UPLine protocol current state : up (spoofing) description:huawei, ar series, dialer1 Interfaceroute port,the maximum transmit unit is 1440, hold timer is 10 (sec) internet address is negotiated, 27.16.226.91/32link layer protocol is ppplcp initialphysical is dialercurrent system time: 2015-03-04 22:00:39+08:00 last 300 seconds input rate 0 bits/sec, 0 packets/sec Last 300 seconds output rate 0 bits/sec, 0 packets/sec realtime 0 seconds input rate 0 bits/sec, 0 packets/sec realtime 0 seconds output rate 0 bits/sec, 0 packets/sec input: 0 bytes Output:0 bytes Input bandwidth utilization : 0% Output bandwidth utilization : 0%bound to dialer1:0:dialer1:0 current state : up ,line protocol current state : UPLink layer protocol is PPPLCP opened, ipcp openedpackets statistics: input packets:0, 0 bytes output packets :0, 0 bytes <Huawei>dis dsl inter atm0/0/0 ----------------------------------------------- -------------- dsl driver and phy status training Status : showtime transmission mode : ADSL2+ AnnexM Line Status : no defect downstream max. attainable raTe (Kbps): 25544 upstream max. attainable rate (Kbps) : 2509 downstream actual net data rate (Kbps): 13311 upstream actual net data rate (Kbps) : 506 downstream snr margin (DB) : 25.5 Upstream snr margin (DB) : 32.5 downstream attenuation (DB) : 8.5 Upstream Attenuation (DB) : 7.1 dowNstream output power (dBm) : 18.4 upstream output power (dBm) : 12.4 Downstream total cells : 205127736 Upstream total cells : 7795007 downstream data cells : 7344197 Upstream data cells : 569829 downstream bit errors : 0 Upstream bit errors : 0 Total drop cells : 0 Downstream total ES count : 0 Upstream total ES count : 0 Downstream total SES count : 0 upstream total ses count : 0 downstream total uas count : 3637 Upstream total UAS count : 3637 Total AS count : 6534 Line modulations G.Dmt : Enabled t1.413 : Enabled ADSL2 : enabled annexl : Enabled ADSL2+ : Enabled AnnexM : Enabled Line capability Bitswap : On SRA : Off Trellis coding : On Board version vendor ID : 0xB5 0 "BDCM" 0 0 vendor serial : 00000000000000000000000000000001 Board ID : 963281TAN Software version : 4.06L.03 Bootloader (CFE) version : 1.2.37-106.24 dsl phy and driver version : a2pd037f.d24f build timestamp : 20131205_1738 ATU-C version vendor ID : BDCM:0x939e vendor number : 0x939e ------- -------------------------------------------------------
Dial if not successful, can debug view, nothing but debug PPP and PPPoE
Term mo
Term debug
Debug PPP All
Debug PPP LCP Interface Dialer 1
After success, you can see that the dialer interface gets the address.
This article from "Mininer" blog, declined reprint!
Home use Huawei AR200 (AR207) ADSL Pppoeoa dial-up Internet