HP (HP) computer can not install Ghost system what to do

HP Computers use the Ghost XP installation system to set the first method:

1, press F10 into the CMOS

2. Find the Power Settings item (Management Setup)----WDRT support This setting is last disabled

3, press F10 Save exit

HP Computer with Ghost XP installation system set the second method

Specific steps to operate:

The first step: press F10 to enter the BIOS setup and come to the basic information interface.

Step two: Use the left and RIGHT arrow keys to select the Advanced (Advanced settings) option.

The third step: using the next key to select the "Onboard Pata/sata adapters", which is the choice of the port/serial port of the meaning of the hard disk.

The fourth step: Select the third "SATA1 Controller mode" serial disk model control.

Fifth step: The machine original serial port hard disk mode for the IDE, that is, this mode can only install the original operating system, can not install the ghost version of the operating system, change hit enter.

Sixth step: Select "AHCI" mode. This mode only installs the Ghost version of the system, but does not start the machine normally.

Seventh step: Press F10 to save exit.

Eighth step: Machine reboot, put into ghost version operating system CD, start reading disk, and install system. The Nineth step: Installs the system, the machine restarts, then presses F10 to enter the BIOS, the hard disk mode changes back to the IDE mode, the machine starts normally.

Reminder: If system installation completes, want to use one key ghost software to carry on system backup also must press above operation.

The third situation and solution (this method requires relatively high professional skills, ordinary users do not recommend use, too numb)

HP DX2310MT using a Third-party encapsulation tool encapsulated clone system reboot prompts the following faulty installation CD version Win2003 also appear this fault

Windows could not start because of a computer disk hardware

Conf iguration problem

Could not read from the selected boot disk. Check boot path

and disk Hardware

Please check the Windows documentation about hardware disk

Conf iguration and your hardware reference manuals for

Additional Information