HP HP Pavilion G4 How to add a solid-state drive?

PC Model HP Pavilion G4 notebook PC laptop, operating system Windows 8.1 Professional Edition 64 bit (DirectX 11).

1. Unpacking box

Optical drive bit hard drive carrier 12.7mm SATA3 magnesium aluminum double tantalum capacitor double lamp Four channel jeyi good wing h27,usb small light drive box good wing H502, Hunger Shark (OCZ) ARC 100 dome 120G Solid-State drive

2, download the required system, as well as NT6 HDD installer v3.1.4 nt6 Hard Disk System installer, through the USB Small drive box to connect the solid-state drive to the computer, the use of the system with the Disk Management partition; Copy the computer downloaded system to the second partition of the solid-state drive.

3, open the back cover, remove the original mechanical hard disk, the hard drive bracket removed, mounted to the solid state hard drive, the solid state drive back, twist to the optical drive fixing screws, remove the optical drive.

4, through the U disk to start, into PE, decompression system ISO file, running NT6 HDD installer v3.1.4, reboot installation system.

5, this can be the first optical drive to fix the bracket, good wing H27 more than three small screws; connect the optical drive through the USB little drive box, eject the pallet, carefully toggle the plastic clip on the side and back of the tray, remove the front cover of the optical drive, and install the front cover of the optical drive into the hard drive carrier of the CD-ROM You can drill a larger point with a distributed Phillips screwdriver.

6, the delivery of the four plastic small screws to the original mechanical hard disk, plug into the CD-ROM drive bit hard drive carrier, slide up into the interface, the red soft tape into the bottom of the system installed, shutdown, the CD-ROM disk drive carrier installed back, with screws fixed.

7, the first start, also did not find this mechanical hard drive; (Lenovo notebook to increase NGFF solid state hard disk installation of specific tutorials)