View Original:http://www.ctoclubs.com/?p=1361
GEN9 uefi mode IP boot installation win2008 R2 system
Laboratory Equipment: ML350 GEN9
Array card: Smart array P440ar
Experimental steps:
F9 Enter UEFI, select System Configuration
Select Bios/platform Configuration (RBSU)
Select boot Options
Change boot mode to UEFI mode and turn off UEFI optimized boot, uefi optimized boot.
ESC exits, press Y to save, and restart.
Self-check to enter IP when F10 icon is present, press F10
7. After entering, the following interface appears
8. Since we need to boot the installation through F10, the first option is selected by default
9. Load IP
10. Go to the IP boot interface
11, select Configure and install into the installation interface (this article has been configured in advance array, if you need to configure the array, then select Perform maintenance HP Smart Storage Administrator), The red box indicates that the server Setup takes 4 steps
12, the first step for the hardware settings, only need to be the system software update as shown in the Skip update, the rest of the default.
13, the second step to select the system type and installation mode and system disk source (such as the media is a USB drive, select USB, disc select disc)
14. Select the Windows system, set the installation mode to custom, and select the installation media (CD or USB)
15, the third step to set the system details, note the Red box time options and adjust the system disk (most of the C disk) size, if not adjusted will be all array space allocated to the system disk, the remaining options can be blank, does not affect the installation, after the installation completed manual login will automatically prompt changes. Please also note that if the operating system is in Chinese, Change OS language and OS keyboard to Chinese.
16, the fourth step can view all the previous settings, if there is a need to modify, select the return button can be reset, if you click the Continue button after the system file, can not directly change, if necessary to change, can only restart the server, re-follow the previous steps to operate again
17. The user License agreement will pop up after the first, accept the agreement before you can continue
18. Start the installation
19, the copy file after the completion of automatic restart, enter the following system installation interface
20. Continue Installation
21, after the installation is still automatic restart
22, prompt to change the administrator password, click OK to change
23, enter the administrator password, press ENTER
24. Prompt for password change success
25, after the first login may have several reboots, restart after the completion of the Device Manager to view the driver status, you can see all the drivers have been installed
26, to this point, the system installation is complete.
HP ML350 Gen9 Install Windows Server R2 (official website document)