HTC a510c Telecom Mobile phone brush machine process

HTC a510c Telecom Mobile phone brush process record

Writed by Peter Hu (2014.6.7) on win7_64

The steps required to brush the machine:

1) s-on encryption protection to remove, change to S-off mode, so as to brush the machine, this step is the most difficult.

2) Brush into the recovery package (commonly known as RC)

3) swipe in ROM package

S-on status set to S-off state

The way to change the s-on to S-off is to try to make a goldcard.img file, and then use the Hex tool to write it to the boot area of the SD card. The way to success is: Download an APK program from the Internet (gold image One click to get tool 2.2.APK), the program installed on the phone, the execution of (said to need root, in fact, can not root), on the SD card generated a goldcard.img file, (although the program also has a direct brush into the SD card function, but this feature does not succeed because it is not rooted. No problem, then manually swipe in to the file will be pulled to the computer, and then use the computer to the SD card on the line format (FAT32).

Press some tutorials on the web with the Hex tool, open the file img and copy the content, and then open the SD removable disk (note: Open the physical disk, not the logical disk), write it, save it. If the card is not recognized on the computer at this time, the description does not succeed. If the contents of the SD disk can be displayed correctly, the Gold card will be successful.

The Step poly Online has detailed articles.

This step is all the key

Download the pg76diag.nbh file (size:755,092 bytes) from the Web and copy it to the root directory of the SD card. (Note: There is a regular version of the file on the Web, that version is not possible, when the application of that version will appear: failed). The file is an HTC hack file that can be used to bypass security checks and package checks when you install recovery and so on later.

Press the volume minus + power button to boot, will enter the Hboot state, do not control it, about a few seconds after the phone will be recognized from the SD card to the file, and will automatically find the file, and then go all the way next.

Press the Power key to perform clean 58 as prompted next (press power) and complete the clean 58

Then use the volume down key to move to the second item, and then execute, completed the installation of the cracked file. Finally stop at the bottom of the interface to illustrate the success.

Unplug the battery, and the s-on becomes S-off at this point. This is the most difficult step to complete. The rest of the step network is a lot of.

The way to fail:

1) The most online strategy is to make a gold card, but many of the sites involved are not open, the feasibility is quite small, and finally ended in failure

2) one key gold V3.0 : This software seems to be possible, but it is always shown in the last step 501 error, occasionally showing 4XX mistakes, and many experiments have failed.

Brush into recovery

After the phone boot into the SD card in the original NBH file deleted, and then put recovery Pg76img.zip (4,925,788 bytes) package to the SD card. Note here to be sure to delete the previous NBH, otherwise enter the Hboot, will find the original NBH execution.

Again volume minus + power key into the hboot state, the phone will automatically search the Pg76img.zip file, wait, a moment will be prompted whether to brush the recovery, select Yes (there are a lot of no, as long as the move that "is" press the Power key on the line.)

Start to brush RC, prompt restart after completion.

Last step: swipe in your ROM

The first two steps are for you to be able to brush into the new ROM. Rom I choose a thin package on the net, relatively good: Marvelc_signed_100711_002629.zip (122,939,459 bytes)

Restart your phone again, delete the recovery zip file (required), and put the zip file on the SD root.

Again the volume minus + Power key enters Hboot mode. At this time the SD card is no NBH, there is no recovery zip file, search is not after, Hboot manual mode, at this time you can use the volume key to select recovery, press power to enter, began to brush ROM.

First empty the machine's data and cache, use wipe data/factory reset (empty data/restore Factory) and wipe cache partition (empty the cache partition), follow the prompts to do, the equivalent of the phone format.

After emptying, return to the RC main menu, select Install Zip from sdcard (select Update from SD card), follow the prompts to select the ROM (marvelc_signed_100711_002629.zip) just copied to the TF card, confirm, It starts to flash into the new ROM.

Done.

Complete

Restart your phone to start various settings. Ok

Description: The ROM is already rooted, and is very streamlined and can be used basically. However, because the phone's system storage area is very small, if you install the software at this time, can only be installed into the system's own storage area, can not install a few software will not fit.

In order to solve this problem, we need to use link2sd.apk. This software needs to separate the SD card into an ext partition, attach the file to the system partition, and let Android think it is a large partition with the system.

The method is: Reboot into the RC menu, in Advanced (advance) has the partition tool, follow the prompts to select the line, first determine the Ext file size (extension ROM), and then determine the size of the swap partition (expansion RAM), the remaining default is the FAT32 partition, waiting for RC to complete the partition of the SD card , this process is very slow, patient wait, after the completion of the prompt, restart the phone.

Then the link2sd.apk get on the phone, perform the installation, run, usually here need to select the type of the second ext, usually choose EXT3. After restarting, execute the APK again, if you are no longer prompted to select the partition type, it is successful.