Recently for the Huawei RH5885 V3 model of the server installed Windows Server R2 operating system, always during the installation process, the installation program error, Warning: Installation process encountered a problem or machine restart, later after the passenger service confirmed that the reason is Windows Server 2008 The installation drive of the R2 is caused by a conflict with the HBA driver, and the HBA needs to be removed before installation. Summing up the problems encountered in the installation of Huawei RH5885 V3, the following steps can be made to ensure that Windows Server 2008r2 is properly installed on the V3 server: 1 Equip the installation media: Huawei provides the installation boot disk, operating system installation media. 2 server power down, unplug cord, cable, hand with anti-static bracelet or touch the cabinet, open the lid, remove the next HBA card, close the cabinet power. 3 Install the installation boot disk provided by Huawei, put it into the CD-ROM drive, and then press F11 key to enter Boot Manager when the system self-test is finished. The 4 screen asks for the boot manager password and selects DVD boot. 5 After entering the Huawei Boot system, redo the raid configuration, if there are multiple sets of RAID, the target RAID group must be set to boot boot. 6 then choose the Installation window, select Custom mode, select Window R2, the system will automatically make some column configuration, then eject the CD-ROM drive, the Windows Server R2 installation media, replace the original media. 7 Choose Next, enter the long Windows Installer, and then power down after installation. 8 Remove the body electrostatic, open the lid, install the HBA card, restore the lid, power on start.
Huawei RH 5885 V3 Install Windows Server R2 recommended steps (self-summary)
