To the users of the illustrator software to the detailed analysis to share the drawing of a High-tech power button tutorial.
1. Open Adobe Illustrator, rectangular tool, draw a rectangle, Width: 100px High: 120px
2. Create a vertical guide, add an anchor point to the middle of the rectangle with the added Anchor Point tool in the Pen tool.
3. Now we select the new anchor point and use the direct selection tool to move the anchor until your shape is shown in the following illustration.
4. Manipulate the anchor at the top to bend its shape, as shown in the following figure.
5. Now we're going to get the other two objects we've created, and we're going to focus three objects at one point.
Select the Rotation tool, and then click a portion of the bottom. Then we'll see the cursor turn into a small black arrow.
6. Press ALT to copy objects (black arrows and white arrows appear)
Open the Properties window, using the angle size in the window: 120,248°.
Taking into account the three points of the object, to the 360° into three, we have to rotate 120 °, the effect shown in the following figure.
7.ctrl+d will automatically repeat the previous step (that is, rotate 120°).
8. We integrate these objects into one. In the Path Finder, click on the "link set", which is the first, and then click Expand to turn them into a whole.
9. Now we are going to make the intersection of the three more rounded. Effects > Styling > Rounded corners.
11. Now let's detach the rounded object from the original object. Object > Expand appearance to get the final image.
12. The effect is shown in the following picture.
13. The middle of the image, such as outside the shape of the production process is the same.
14. Repeat the 1-12 step. We're going to create a new object like this.
15. We'll just create such a new object, it's only half.
16. Use the mirror tool, (inside the rotating tool), press and hold Shift+alt, copy, flip. Get a symmetric image.
17. Now we use the path selection tool to combine two images, you can also use the Delete Anchor Point tool to combine two images.
18. The same steps as before to copy the first object, the first rotates 120 °, the second ctrl+d. If forgotten how to do, go back to 6-7 steps to see.
19. Finally we build a circle, which will be used as an indicator light, and will be lit in its hover state button.
We'll finish adding masks in Photoshop for the next step.
20. Now select all vector graphics, CTRL + C, and copy them to the Clipboard.
21. Open Photoshop. Create a 1024x768px size layer.
22. Set the background to black, then select the background layer, in the layer blending mode, gradient overlay.
23. The gradient overlay parameter is set as follows: #333333, #000000, radial gradient, range between 130-150%.
You can drag the center of the gradient until the final effect is what you want.
24.ctrl+v or Edit > Paste to paste the graphic into PS.
25. We now have only one shape layer in PS, we have to divide it into different layers.
Copy four, subtract unnecessary shapes, and leave the components.
26. The effects and layers are sorted as shown in the following figure. Don't forget to name each layer. Then we'll add the layer style to Photoshop.
27. The main button (that is, the figure in the 1-12 steps). Open layer style, on blending options: default,
To see the effect of our layer, reduce the transparency to zero.
First, gradient overlay, color #333333 (dark gray) and #000000 (black.
Radial gradient, range 120%.
28. Inner Shadow, cancel global light. Multiply the bottom, -90°. The parameter settings are shown in the following illustration:
29. We have ended the first part of the button editing process, now we're going to do it on the front part of this an opaque surface that we will add after the gloss and the 3D extrude effect.
30. Now we make the edge of the button. Layer Blending mode-stroke -3px outer stroke. The color parameters are shown in the following illustration:
31. By changing the angle of the gradient, we place the lighter area where we want it to be.
In this case, the brightest place should be at the top of the edge.
32. We now add a more complex chrome-plated effect by adding high light and shading.
Bevel and Emboss: stroke relief, smoothing, 100. Size: 5, Softening: 2.
The detailed parameter settings are shown in the following illustration:
33. We add the inner glow so that we can display the 3D stereo effect of the button.
Multiply the bottom, transparency 20%, black. Vaginal plug: 60 Size: 10
The detailed parameter settings are shown in the following illustration:
34. Now, we need to manually draw some details on the button.
The first step is to select the button's shape layer, go to the Path window, and select the button layer to create a path with the same shape.
35. Now, we'll shrink the size of the selection by choosing > Modifying > Shrinking. 10 pixels less than the original size.
36. Now we soften the constituency. To select > Modify > Feather or press ALT + Ctrl + d (Windows).
We use a 1-pixel feather and then press OK.
37.ctrl+h hides the selection (ant line). Using the Brush tool, create a new layer using a 35px brush and 10% traffic.
Use a white brush to draw some light in the new layer, which is the reflection of the button on the light.
Because light comes from above, add a brighter light to the upper area of the button, so we will increase the light in the object's dark part.
38. Again ctrl+h, showing the selection (ant line), we will reduce some pixels, and then with the brush to add some more complex effects.
This time we cut 3px, feather 1px.
39. Hide the selection again. Then delete to delete some of the more drawn in the previous step, which is beyond the selected area of this step.
40. Now we make the middle part of the button, reduce the "button bevel" transparency to 0%.
41. Layer Style-inner shadow: Multiply, -90°, transparency
The detailed parameters are shown in the following illustration:
42. Strokes. The detailed parameters are shown in the following figure: 1, external, normal, color.
43. Projection, color filter, transparency 13%.
The detailed parameters are shown in the following illustration:
44. Inner Glow, color filter, transparency 45%, #4A4A4A, soft, edge
The detailed parameters are shown in the following illustration:
45. The following image is the main button that we do well.
46. Now we make button icon, font Download: Http://pan.baidu.com/s/1HlSgY, enter "Q", Font size: 48pt
47. Layer style, 3px, outer, black
48. Bevel relief, stroke relief, smooth, 100.
Filter color 30%, multiply the bottom 60%.
The detailed parameters are shown in the following illustration:
The detailed parameters are shown in the following illustration:.
50. Now we create 3 LEDs on the back of the button, the first step is to add color #06b9fb to the shape layer, double-click it to edit the color.
(The original tutorial steps are not clear, the small proposal is to create a new layer, and then use the Oval tool to draw a circle, placed behind the main button, the picture format.)
Or an elliptical selection tool, filled r6,g185,b251)
51. Now select the primary button at the path and the selection appears.
52. Widen the range of constituencies, select > Modify > Expand
54. Select > Reverse, or Ctrl+shift+i.
55. Add a mask to get the final LED light shape.
56. To the LED light around the increase or decrease some small light, that is, LED light add layer style, stroke, color selection, such as the main button surface color
57. Bevel relief, outer stroke.
The detailed parameters are shown in the following illustration:
58. Inner glow, multiply the bottom.
The detailed parameters are shown in the following illustration:.
59. Projection, multiply the bottom.
The detailed parameters are shown in the following illustration:
60. The effect as shown in the picture
61. Copy the LED layer, and then on the LED copy, fill it with white.
Outer Glow, Linear dodge (add)
The detailed parameters are shown in the following illustration:
62. Projection, Color filter
The detailed parameters are shown in the following illustration:.
63. Create a new layer, ellipse tool, draw a circle of the following size, feather 20PX.
64. Fill in white after feathering.
65. Blending options in the layer style, fill opacity 0%.
66. Gradient overlay: Overlay, transparency 60%, linear,
The detailed parameters are shown in the following illustration:
67. Now that we have completed all the details of the button, we need to add some details to the background, using the graphic "backgr bevels" that we created in the AI.
69. Layer style, stroke, 1px,35% transparency, multiply the bottom.
70. Projection, filter color.
The detailed parameters are shown in the following illustration:
71. Finally we need to hide part of the graphic, ellipse tool, draw a circle of the size of the following figure, feather 20px, and add a mask. Complete!
Okay, the above information is small make up to you illustrator of this software users brought to the detailed drawing of a High-tech power button tutorial to share the full content of the whole, you see the users here, small series believe that now we are very clear method of it, So now you go to follow the small series of tutorials to draw their own High-tech button it.
