1. Select "printer and fax" from the Start Menu ".
2. Right-click "Add Printer", click "Next", and select "local printer connected to this computer ", do not select "automatically detect and install my plug-and-play printer ".
3. Next, you need to "Create a new port". In the port type, select "standard TCP/IP Port ".
4. Enter the IP address of the printer (for example, 158.132.215.206 or 158.132.215.202 for PolyU abct) in the text box after "Next ), you can skip the "Port name" and set it to "Next.
5. If the LaserJet printing server being configured has multiple parallel ports, the system will ask you to select the port on which the printer is connected. After confirming the port configuration information, proceed to the next step.
6. Next, go to the printer software (driver) installation panel and select a printer vendor and model (such as HP LaserJet 8100 series pcl6) from the list. If the list does not exist, click "Install from disk" below and select the driver of the printer from the hard diskProgramAnd install. After installation, you can set a name for the printer. You can also use the driver Wizard to install the driver.
7. In the settings window of whether to share the printer, you can select share or not.
8. If necessary, you can print the test page. If the test is successful, click the finish button to complete the TCP/IP network printer adding process.