Install and configure kvm in CentOS

Modify the file according to your actual situation, and only record your work environment here;

1. files required for installing the system

Yum-y install kvm kmod-kvm-qemu-img
Yum-y install bridge-utils tunctl

2, create the ifcf-br0 file vi/etc/sysconfig/network-scripts/ifcfg-br0

DEVICE = br0
HWADDR = F4: 6D: 04: 40: 90: 47
TYPE = Bridge
IPADDR = 192.168.1.22
NETMASK = 255.255.255.0
ONBOOT = yes
NM_CONTROLLED = no

3, modify the system Nic configuration file ifcfg-eth3, the modification content is as follows:

DEVICE = eth3
HWADDR = F4: 6D: 04: 40: 90: 47
ONBOOT = yes
BRIDGE = br0
NM_CONTROLLED = no

4. Modify/etc/qemu-ifup

#! /Bin/sh
Set-x
Bridge = br0
Interface = $1
/Sbin/ip link set $ interface up
/Usr/sbin/brctl addif $ bridge $ interface

5. Modify/etc/qemu-ifdown.

#! /Bin/sh
Set-x
Bridge = br0
Interface = $1
Ifconfig $ interface down
Tunctl-d $ interface

6,/etc/init. d/network restart

If the configuration is normal, after connecting the device

1. Create a virtual machine

Qemu-img create-f qcow2 linux-6-x86_64.img 10G

2. Install virtual machines

/Usr/libexec/qemu-kvm-m 1024-hda. /linux-6-x86_64.img-localtime-net nic, macaddr = DE: AD: BE: EF: F0: 01-net tap-cdrom/opt/release/centos-6-x86_64-CD.iso-boot d-vnc: 1

3. Run the VM

/Usr/libexec/qemu-kvm-m 1024-hda. /linux-6-x86_64.img-localtime-net nic, macaddr = DE: AD: BE: EF: F0: 01-net tap-vnc: 1