$: Because both NT and Linux have to write mbr, It is troublesome to install both systems on the machine. In fact, the simplest method is to install 98 first, nt then install Linux When installing Linux, you cannot install LILO in the hard disk mbr, but in the boot zone of the Linux partition. Then, use fdisk to set the Linux partition to active. Then, after the Linux partition is started, the LILO option of Linux is entered before NT. OS options $: Install NT and LINUX on a hard disk. Nt osloader is better, at least its selection menu can be Visible and can be Chinese. 1. Install 98, NT 2. install LINUX and install LILO in the first SECTOR in this zone. 3. Use loadlin vmlinuz root =/DEV/device name Or a floppy disk to start the system to the LINUX system. 4. Use dd if =/dev/hdxn of =/root/linux. ldr bs = 512 count = 1 to write boot records. 5. Add Description. Note: If you recompile the core, you need to repeat steps 4 and 5. If you install LINUX on a hard disk after 8 GB, this method will not work because LILO reads hard drive CYLINDER from BIOS, cannot exceed 1024 |