Install VMWare on a PC

Install VMWare on a PC. The machine configuration is a common PC with an SSD hard disk added. The motherboard is Intel's latest DB75EN, which integrates the graphics card, Nic and sound card, and the memory is 8 GB.
Obviously, the installation of Virtual Box in WINDOWS is not suitable, so I chose to install it directly.
VMWARE vSphere Hypervisor (ESXi) https://my.vmware.com/group/vmware/info/slug/datacenter_cloud_infrastructure/
Vmware_vsphere_hypervisor_esxi/5_0.
The procedure is as follows:
1. First, you need to apply for an account to download the software above. The software series includes three files:
VMware-VMvisor-Installer-5.0.0.update01-623860.x86_64.iso: EXSI system boot file, installed on
Bare metal, including OS. VMware-tools-linux-8.6.5-621624.iso: tool, without VMware-viclient-all-5.0.0-623373.exe: client software, remote control of virtual machines
2. To be able to install EXSI on bare metal, you must create a boot disk. There are two methods: Enable the disc or enable the USB flash disk. I chose the latter;
Make this requires some tool software, I download is unetbootin-windows-575, very simple and very easy to use; two choices:
Select an ISO, select a USB flash drive, and then click OK.
3. However, this is often not the case. I listed the model of my motherboard Nic. Unfortunately, my NIC driver is not supported,
With the help of my colleagues, I knew that I could package a third-party driver to the previous ISO to generate an ISO with the driver.
You need to download two files: ESXi-Customizer-v2.7.exe and E1001E. tgz (NIC Driver); see this connection: http://www.ivobeerens.nl/2011/12/13/vmware-esxi-5-whitebox-nic-support/ 4. after completing the previous step, you need to go back to 2. now you can set the computer to start the installation from the USB flash drive.
6. Unfortunately, the disaster has come again, and there are no installation errors. it is OK to restart, but the computer tells you that there is no device to start;
Depressed! So I checked the information, asked someone, suspected that the installation of a USB flash drive was too much, and I suspected that the installation was not correct. I spent a lot of time here.
However, we finally found a setting in the BIOS without ENABLE: UEFI (uniied extensible firmware interface ),
In the one in which the boot sequence is set, set it again. Everything is OK. Now you can go back to the client to install the virtual machine. The author is stupid.