Knowledge Point Analysis:
1, Intel official from the 7 Series motherboard to truly support the USB 3.0 interface, USB 3.0 driver, is the first generation of Intel driver, commonly known as "Intel's official primary USB 3.0 driver."
2, before the Intel 6 Series Motherboard also has the USB 3.0 interface, actually the motherboard USB 3.0 interface provides the driver, is not the Intel official and the third party.
3, the USB 3.0 drive on the Intel 8 Series motherboard is Intel second-generation driver, Intel's USB 3.0 drive, the version is naturally newer and better, because the version driver is backward compatible. Of course, we associate the drive, from the service website download can.
4, the early USB3.0 driver, there is support for Windows XP, Windows Vista system, but to the later version of the two systems to support the cancellation. The Windows 7 system is required to manually install the USB3.0 driver, and is the installation process described below. Windows 8 System, the Intel chipset USB3.0 is currently supported directly by the system without installing the driver.
Operation steps:
Intel chipset USB3.0 interface, manual installation process for Windows 7 system drivers:
1, first to
Lenovo to download the correct driver, you need to note that the USB3.0 drive, sometimes under the "motherboard and chipset", sometimes separately listed.
2, after the installation of Windows 7 system, you can see in the Device Manager is not installed equipment, the red box in the figure is USB3.0 equipment.
3, Lenovo official website driver is the automatic decompression. Before installing the USB3.0 driver, you need to install the Intel chipset driver, double-click the downloaded program to start the installation process, only need to continuously click Next, and finally complete and restart the computer to complete.
4, now start to install the USB3.0 driver. Double-click the downloaded USB3.0 driver to start the installation process, the first hint of automatic decompression, and then start installation, the middle prompts need to click "Next" or "yes" to complete the installation, and finally complete and restart the computer can be.
5, after restarting the Device Manager, you can see that the USB3.0 device is normal, the driver installation completed.
This is actually very simple to find the USB3.0 driver installation can be, of course, if we have a motherboard driver directly using the motherboard driver can also be installed in the first step oh.
