After installing the client software for TP-LINK security system on the computer, the computer can centrally manage the IPC in the Lan like NVR. If you need to use our IPC with a third-party NVR, you can activate IPC in batches through this client, and then use the third-party NVR for management.
This paper introduces how to manage IPC in batches by using TP-LINK security system.
Download from TP-LINK official website
TP-LINK
Security
System, Decompress the package, double-click it, and install it as prompted. The following quick icons are generated after installation.
Open the client software and set a password for the first login. Please set a 6-32 character password. This password will be used to log on to the client later.
After logging on, click
Set
>
Device List
>
Device to be addedYou can see the unadded IPC.
Note:Make sure to configure the network before batch activation. Otherwise, batch activation will fail.
1
, Network configuration
The default IP addresses of IPC are 192.168.1.60. To avoid conflicts, configure the IP address of IPC first.
Click
Network Configuration, Enter the start IP address and Gateway.
2
Batch activation
In
Device to be added
Select all inactive devices, and then click
Batch activationTo configure a unified password for IPC:
Device to be added, Click
AddEnter the user name and password of the IPC. By default, the user name is admin, and the password is set when the device is activated. And click
OK, As shown in the following figure.
Select the storage location of the monitoring video, and click
OK, As shown in the following figure:
Add other IPC in the same way.
Added devicesTo view the added IPC Information.
After the IPC is added to the TP-LINK security system, you cannot preview the IPC monitoring screen. You can manually add to preview. Click
Preview, Click.
Select the IPC you want to add and click
OK.
In the same way, add another IPC in sequence. The preview effect is as follows:
Note:After the TP-LINK security system is closed, the next time you run the software, you need to click to add to preview.
At this point, the TP-LINK security system to complete the batch activation of IPC, you can do a unified configuration in the security system client
