The new stricter TIA standards and Cat 5e/Class D and Cat 6/Class E high-speed data cable systems have higher requirements for jumpers than ever before. Currently, Fluke network provides the most convenient jumper testing method. Simply connect the sturdy and compact patch cord test adapter to the DSP-4X00 cable analyzer and download the test database, you will have a high-speed, fully automated patch cord testing method that meets the TIA standard. Improve the bit rate, increase the throughput of the channel, increase the margin of the system, reduce the Network downtime-you will get a high return-this is fluke Network super perspective Network SuperVision ).
Overview
Quick inspection of patch cord compliance with the new TIA 568B/ISO Standard
Check previous jumpers to isolate network performance degradation caused by failed Jumpers
Test jumper to ensure optimal network performance and greater system margin for the entire Channel
Reduces errors of advanced applications. These applications use multiline pairs and one line pair for bidirectional transmission.
Durable and reliable
United States Krone Kelon recognized certificate
Features
Verify consistency with TIA standards
Keep at the highest point of the new TIA Standard
Patch cords are common, but are often ignored when considering network performance. From the very beginning, the performance of all Jumpers is different, and the performance of new jumpers is inconsistent. In addition, many Jumpers only test the wiring diagram rather than the performance. In the actual environment, they are constantly plugged in and out. Permanent Link Testing only describes the performance of the installed fixed link, excluding jumpers. Although it is well known that patch cord quality has a significant impact on network performance, the actual test so far is time-consuming and costly.
The patch cord Testing Solution of fluke network gives you a simple and efficient way to quickly check whether the patch cord meets the performance standards of TIA/ISO:
Automated Testing: completes user and device jumper testing within 15 seconds
Efficiently and accurately tests whether the Jumper meets the TIA/ISO Cat 6/5e jumper standards
Ensure patch cord performance conforms to installed link performance
Key parameters for measuring all Jumpers: wiring diagram, near-end crosstalk NEXT) and Return Loss (Return Loss)
Reliable and robust performance
Powerful Databases
The DSP-4000 series supports many cable standards as well as physical layer metrics for many network applications. The test parameter indicators and test limits of these indicators are stored in a test database. They can also be upgraded separately.
DSP patch cord testing database can be quickly downloaded and easily installed on DSP-4000 series testers through LinkWare cable management software. The jumper database also supports testing standards for the TIA and ISO links and channels. If you normally test the installed cable link, permanent link, or channel in accordance with the provisions of TIA or ISO, you do not need to reset the tester.
Quick and convenient testing
Test Jumpers as easily as test links
The DSP patch cord testing solution that meets the TIA standard is simple and quick. Once the tester is set as a jumper test database and the test adapter is connected to the host and remote unit, directly Insert the Jumper into the tester to start the test immediately. Select the required test standard from the menu, place the tester's button in AUTOTEST, and press the test key. It takes about 15 seconds to know whether the Jumper meets Cat 5e or Cat 6 performance requirements.
Optimize network performance
Because the new TIA standard has stricter requirements on jumpers, simple connectivity or wiring diagram tests are not enough. Press the button to check whether the DSP patch cord Testing Solution of fluke network meets the best TIA/ISO requirements:
Quick inspection of patch cord compliance with the new TIA 568B Standard
Check previous jumpers to eliminate network performance degradation caused by unqualified jumpers and reduce downtime
Test jumper to ensure sufficient balance of channel throughput and System
Reduces errors of advanced applications. These applications use multiline pairs and one line pair for bidirectional transmission.
Technical Indicators
General metrics
The DSP jumper Test Adapter meets the TIA/EIA-568-B.2-1 and IEC 61935-2 standards for Cat 6 jumpers. The DSP jumper test adapter consists of two adapters, one connected to the host of the DSP4X00 tester, and the other connected to the remote end. These Sockets for this test adapter meet the standard requirements for TIA/EIA-568-B.2-1.
Test Parameters
Wiring Diagram to ensure the correctness of the Client Connection
Near-end crosstalk (NEXT) (unidirectional)
Return Loss (unidirectional)
Pass/failure test threshold
The T patch cord test database contains the pass/failure test limits. The criteria are as follows:
TIA/EIA-568-B.2-1, Cat 5e and Cat 6
ISO/IEC 11801-2002 Cat 5 and Cat 6
The jumper test database contains the following lengths: 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 7.5, 10, 15, and 20 meters.
DSP-PCI-6S jumper Test Adapter test threshold list
Measurement Accuracy
The measurement accuracy is calculated based on the guiding principles of standard TIA/EIA-568-B.2-1 and IEC 61935-1s. The typical precision is based on the obtained performance parameter data and is much better than the requirements of the Third-level precision. It does not include performance changes caused by changes in the test adapter.