Juniper Router Configuration

Ist:ignore "> Add Port configuration Template

(1) port configuration with Sub-interface required

Set interfaces FE-2/0/1 vlan-tagging―――― enable encapsulation VLAN on Configuration interface

Set Interfaces FE-2/0/1 Unit 424 Vlan-id 424――――― configuration sub-interface, VLAN 424

Set Interfaces FE-2/0/1 Unit 424 Family inet address 192.168.254.146/30―― Configure Sub-interface addresses

(2) No sub-interface configuration required

Set interfaces FE-2/0/23 Unit 0 Family inet Addressing 222.60.11.154/29―― direct configuration address

(3) E1 port configuration

Set Interfaces e1-3/0/0 Encapsulation PPP package link type, including PPP,HDLC, configured according to actual situation

Set interfaces e1-3/0/0 e1-options framing unframed binding format with parameters including unframed,g704, G704-NO-CRC4

Set interfaces e1-3/0/0 Unit 0 Family inet addressing 192.168.1.126/30 configuration address

(4) CE1 configuration

Set interfaces ce1-4/0/0 clocking external

Set interfaces ce1-4/0/0 e1-options framing G704-NO-CRC4

Set interfaces ce1-4/0/0 partition 1 timeslots 1-31 sets Channel 1 time Gap 1-31

Set interfaces ce1-4/0/0 partition 1 Interface-type ds――― sub-interface type DS

Set Interfaces Ds-4/0/0:1 Encapsulation Ppp――― Configuration Sub-interface package PPP

Set interfaces ds-4/0/0:1 Unit 0 Family inet Filter input Nyyh

Set interfaces ds-4/0/0:1 Unit 0 Family inet addressing 10.238.173.197/30―――― configuration address

(5) Policy configuration

Set Firewall filter Shigonganjumas term 1 from source-address 10.238.173.180/30

Set Firewall filter Shigonganjumas Term 1 then accept

Set Firewall filter Shigonganjumas Term 2 from source-address 10.238.173.0/24

Set Firewall filter Shigonganjumas Term 2 from source-address 10.238.179.0/24

Set Firewall filter Shigonganjumas Term 2 then discard

Set Firewall filter Shigonganjumas Term 3 then accept

The Set interfaces fe-2/0/0 Unit Family inet Filter input jiaotongyinhangduanxin――― applies policies to sub-interfaces.

Daily Maintenance Commands

1 View serial number show chassis hardware

2 view hardware Show chassis hardware

3 View software versions show version

4 View CPU Show chassis Routing-engine

5 ping command

Ping 192.168.1.254 Rapid #快速ping地址

6 View device alarm information show chassis alarms

7 View detailed hardware temperature and status information show chassis environment

8 information required to collect the case request support information

This article from the "Operation and maintenance work Struggle" blog, please be sure to retain this source http://yanghuawu.blog.51cto.com/2638960/710566