1. Connect to the firewall via Xshell telnet
Firewall IP address is 164.215.15.210 or 164.212.233.205
Connecting to 164.215.15.210 ...
Connection established.
To escape to local shell, press ' ctrl+alt+] '.
Cxds (TTYP0)
2. Enter the current user name and password
Login:admin User Name
Password: Password
---JUNOS 11.4r1.6 built 2011-11-15 12:44:14 UTC
3. Change the password
[Email protected]> Configure Enter configuration mode
Entering configuration mode
[Edit]
[Email protected]# Set System login user admin authentication plain-text-password Setup Password
New Password:
Retype new Password:
Enter and confirm the password
[Edit]
[Email protected]# commit Check checks to see if the configuration is correct
Configuration Check succeeds
[Edit]
[Email protected]# commit makes configuration effective
Commit Complete
[Edit]
At this point, the password modification succeeds.
Juniper srx220 under Change telnet password