LAN core switch configuration problems

The following describes how to configure the core switch. in order to confirm that the failure of a vswitch is irrelevant to the working status of the Web server, this shows that the speed at which LAN workstations transmit files to each other is normal.

In addition to some common faults, when encountering problems, we should find some professional personnel to repair them. Here we have analyzed the fault phenomenon of slow login to the core switch, no matter how reasonable the network size of a LAN is. No matter how good the network device is, it may have a network fault, just like a person, no matter how good he is, sometimes there will be some minor problems;

What we can do at ordinary times is to strengthen network management, so as to prevent as few switches as possible in the LAN. Of course, in the process of actually managing the Network, some details are often beyond our control. network faults caused by some inconspicuous factors will naturally fail to be solved.

This is not the case. The failure below in this article is due to the poor ventilation of the equipment, resulting in a serious "Fever" of the core switch, which eventually leads to a slow Login Server failure. This factor rarely occurs, during the troubleshooting process, the network administrator ignores it and leads to twists and turns in the troubleshooting process. Now I will share it with you to discuss it!

The network structure of the LAN in a building is very simple. About 100 computers are distributed on the sixth floor. The computers on each floor use the 24-port switch of the brand name, connect to the QUIDWAY S3050 master switch of the LAN.

The Web servers, printing servers, and some important computers are all independently connected to a real-time core switch. These real-time switches are cascade with the main switch through M twisted pair wires. In normal times, all common computers in the LAN can share access with each other, and they can also normally access important hosts such as the Web server and print server of the Organization.

However, a notification message was recently issued by the Organization on the LAN Web server, asking all employees to respond in succession When They browsed the Internet, saying that the login speed to the Web server was very slow, there is no feeling of just one breath in one breath.

A fault is a command. After receiving a call with a slow logon speed, I immediately open my laptop and run the ping command to test the IP address of the Web server. The results returned by the test operation are as follows. The IP address of the Web server can be pinged in a short time, but cannot be pinged in a short time. In addition, the server response time is also relatively long when pinged, Which is compared with the time when the usual response time is less than 1 ms, it seems that there is a network fault in the LAN.

Since most employees in the LAN are not able to log on to the Web server of the Organization normally, will this server work unexpectedly? As we all know, Web servers continue to work for a long time, which is especially prone to slow response.

After all, the server usually processes a large number of requests. If the number of access requests processed by the server exceeds a certain standard within the same period of time, the server's system resources may be quickly exhausted, in this way, the Web server system cannot run normally.

With this in mind, I immediately remotely started the server system. After the server is successfully started, I ping the IP address of the server again and found that the ping command response time is still abnormal; when I try to log on, I can see that the access speed is still slow. In order to confirm that the switch failure is irrelevant to the working status of the Web server.

I tested the IP addresses of printing servers and other important computers, and found that these important computer ip addresses cannot be pinged normally, which indicates that the problem is indeed not on the Web server, after excluding the abnormal status of the Web server, I began to suspect that there was a virus in the LAN network, which caused the blockage of the entire network transmission channel.

Because the LAN contains a large number of computers and relies solely on anti-virus software to scan and kill one by one, the workload is huge and it is not conducive to efficiently solving network faults, therefore, I plan to test whether the communication speed between computers in the LAN is normal.

I first pinged the IP address of one of the computers, and found that the ping command responded quickly. However, I was a little worried, as a result, I tried to share files with the computer. I found that the transfer was completed in a twinkling of an eye, which showed that the speed of file transmission between LAN workstations was normal.

Later, I carried out the shared file transfer operation with other computers and found that the file transfer speed was normal. This proves that the network transmission channel of the LAN is not blocked, even if the computer in the LAN is infected with a network virus, it will not have a substantial impact on the operation of the login server. Therefore, the author judges that the failure of the core switch has nothing to do with the network virus or broadcast storm.