Lenovo A600E can't use wireless network to solve

One, unable to connect to the wireless network
1. If you are prompted to be deactivated, check that the password you entered when connecting to the wireless network is correct. When you enter a password, you can check the "Show password" option, which avoids the occurrence of a password error, such as spelling confusion when you enter a password, as shown in figures 1-1 through 1-2.

Figure 1-1

Figure 1-2
2. Some wireless networks may be limited to access to the device, such as the physical address binding, and so on, you need to consult the Network service provider or your company's IT department, to discuss whether you can add access to your phone or remove the corresponding restrictions.
3. Confirm that the name of the wireless network is Chinese, if it is Chinese, please change it to English or digital and try to connect again. In addition, to enhance encryption security, Lenovo mobile phones require encryption of the wireless network password of not less than 8 bits, please ensure that the router, set a password greater than 8
4. such as mobile phone before the normal connection to use wireless function, for some reason it is not possible to connect, it is recommended that you try to reboot or restore the factory settings so that you can cancel the connected memory and reconnect again; if the problem persists, confirm that you have previously done something to the phone or wireless router, You can then try to restore your phone by restarting or backing up critical data, and then restoring your phone by path "system settings"-"Restore factory settings", as shown in figures 2-1 through 2-5.

Figure 2-1

Figure 2-2

Figure 2-3

Figure 2-4

Figure 2-5

Two, connected to the wireless network, but not the Internet
1. To ensure that the wireless network on the connection to the normal Internet, it is recommended to use a notebook or other devices such as smart phones to connect the same wireless network to determine whether the normal Internet. If the internet is not normal, you can check the wireless router is normal, light is lit and beat.
2. Ensure that the wireless network signal is good, when the wireless signal is very weak (signal strength to show a point), although the display has been connected, but easier to automatically disconnect, on the phone may appear to be unable to go online at this time please to the signal strong area to try.
3. Some public places, such as McDonald's, airport, etc., connected to the wireless network, want to go online also need to obtain additional user name or authentication code. When you open any page, it links to another interface and asks for a username and password. At this point, you can consult your local network operator or the site service person for a username and password, as shown in figures 3-1 through 3-3.

Figure 3-1

Figure 3-2

Figure 3-3
4. If only some of the network features or Web pages are not accessible, you can enter the wireless router settings, "Security Settings"-"Domain name filtering" function to see if there are restrictions on the network. This may be due to a wireless router that restricts the login URL.

Third, mobile phone can not search the name of the wireless hotspot, other devices are normal
This may be because some of the options are turned off on the wireless router, such as when some wireless routers enter wireless parameters-basic settings to turn off the "turn on wireless" and "Allow SSID broadcasts" feature. You need to go to the wireless router to set up, or manually add the wireless network and connect through the path "system settings"-"Wireless and Network"-"WLAN settings" on your phone.