Lenovo a65 detailed tutorial on getting root permissions with one click

I haven't told you how to get the root permission of Lenovo's a65 mobile phone. Let's talk about how to get the root permission of this mobile phone, in fact, the root method is quite simple. You only need to follow the steps in the tutorial. Let's take a look at the specific operations:

I. preparations:

1: first install the 91 mobile assistant on the computer side (it can also be a pea pod, but I heard that the driver cannot be installed under the three-key boot State): I used the XP original version, will prompt the computer to install Microsoft. net. framework2.0. After the file is installed as prompted, the 91 mobile assistant starts successfully.

2: Prepare a data cable

3: Download the root toolkit. Click here to download it.

2. Start the root operation:

1: Open the phone and set the phone to "USB debugging". The procedure is as follows: Set -- select Application --- Development --- USB debugging (check box ). Then connect to the computer when the device is turned on. On the "91 mobile assistant" page, a prompt is displayed, indicating that the phone "not root" and "connected to Lenovo a65" is successful ". (If the connection fails, you cannot proceed to the next step .)
 
2: After successful connection, unplug the data cable and turn off the power of the mobile phone.
 
3: press the three keys to start the system: press the volume down key + menu key (leftmost) + press the power key. Do not immediately wait for 5-10 seconds after the boot. (Note that you must press the menu key. If you press the light button, it is equivalent to only pressing the volume down key + power key, will enter the factory mode (English interface), you have to repeat the three key boot steps. If you press the three keys in place, the boot page will remain on the first screen, that is, the "wo" white page.
 
4: Release the button and connect to the computer with a USB cable while the first screen is on. Then, the computer will prompt "find new hardware wizard ". Ignore it. In fact, you cannot follow this prompt. Find the downloaded roottool package, and click a65-tools-v2.exe;

 

5: press the "1" key as prompted, and then press the Enter key as prompted. After that, the phone will automatically restart. At this time, the computer will prompt "Find a new hardware wizard, but it cannot be installed", and there is a corresponding bubble prompt in the lower right corner of the computer, ignore it.
 
6. Disconnect the data cable from your computer. Click the cell phone battery and try again, and then open the cell phone to see if "authorization management" and "R. e Manager "two icons, if there is, congratulations, root is successful; if not, please try again several times.

Interestingly, after a successful root operation, the mobile assistant on the computer also prompts that the mobile phone is "not root" and cannot be used to uninstall the UNICOM custom software. However, you can use the "R. e Manager.

7: If you want to refresh the machine for failover, you can repeat Step 3 and Step 4 to run a60-tools-v2.exe. In this case, select 2 to install recovery with one click and restart automatically.

Click to view more [Lenovo a65] [root]

(Source) http://www.netded.com/a/jingpinshouji/2012/0727/24618.html