Lenovo server rd640 construction document

 

Lenovo server rd640 construction document

Note: to configure the BMC port on the Lenovo server, you must manually set the IP address on the BIOS. Then, you can ping the IP address, enter the IP address on IE, and log on to the window again, the username and password are as follows:

Username: Lenovo
Password: len0vo

 

Disk array card configuration is the webbios software method.

If you want to use KVM to install the system, you need to install ie on win7.

------

Document

 

Link: http://pan.baidu.com/s/1hqiSR7Q password: phv7

------

Please kindly advise if you have any mistakes. Thank you!

This article is from the "liweiinone" blog, please be sure to keep this source http://liweibinone.blog.51cto.com/9525320/1570492

Lenovo server rd640 construction document