Lenovo Y460, Y470 replacement Memory tutorial

Lenovo original ddr3-1333 notebook memory using 6-layer PCB substrate design, a large number of serpentine wiring and 135-degree corner processing, the overall work rigorous, for good stability, compatibility and efficient operation provides a solid foundation. Have a strong stability and reliability, the perfect quality of the original particles, precision welding technology and strong brand guarantee, the foundation of the memory fly general speed, memory allows you to experience the same pleasure! In the guarantee system safe and stable operation at the same time, provided the green process of memory particles and environmental protection PCB board, so that it has low radiation, Low power consumption, support low voltage function. Therefore have a certain overclocking space, for the player overclocking experience detonated strong power! Compatible with AMD and Intel Core I7,I5 and i3 processor configurations, compliant with Intel low voltage standards. The use of new nano-technology produced by the original memory particles, is the world's leading technology and excellent quality of memory particles.

　　teaches you how to identify memory and motherboard models:

Baidu Search Master lu, download and install, run (how the computer on the original installed on there, directly run as possible). Click < hardware detection > Memory and motherboard model glance.

Memory-Bar Installation Step description

　　Step one: Remove the cover

There is cover protection on the Notebook memory slot, first step is to remove the cover first. Most notebooks have a logo on the cover, some concave memory graphics (pictured), unscrew the surface of the screws after a little hard to open the back cover, and then you will see the memory, heat sink, chip and hard drive

　　Step two: Remove the memory

If you have only one memory slot, you need to use the replacement method to upgrade your memory, which requires you to first remove the original memory bar.

　Step three: Install memory strips

The process of installing the memory bar is very simple, simply put the new memory into the bank of the memory slot, insert tight after press, press down will have a crisp click sound, and then the memory protection Board can be.

　　Step four: Test capacity

The final step is to detect the memory of the notebook card most, the method is very simple, first need to enter the notebook BIOS, let the BIOS first identify the memory, most notebooks are on the boot press F2 key (on the boot will be prompted, or reference manual) into the BIOS. When you reboot and boot into the system, you can see the memory capacity in the General tab by right-clicking the computer or My computer.

Note:

1 Before installing the upgrade memory, please touch the metal object and let go of the electrostatic on the hand to avoid damaging the memory.

2 in the installation process as far as possible do not touch the memory of the golden finger parts

3 due to different types of laptops and computers, installation may vary, please know beforehand