Linux Learning-Install virtual machines and Linux systems

Learn Linux first step to install the environment, virtual machines have several options, temporarily first use Vmvare Workstation8.0 or 9.0 version

Installation is not difficult, after the installation of the virtual machine, (here to add, the virtual Machine network card configuration Select Bridge Mode) the CentOS system disk ISO file loaded into the virtual machine CD-ROM, the start.

At this point some machines may be wrong to start, because the virtual machine cannot install 64-bit system, you need to change the settings in the BIOS of this machine, step: 1, restart your computer;
2, always press F10, select Language (English), enter the BIOS setup interface;
3, press the arrow key to select Security, in the dropdown menu in the system security, press ENTER;
4, Virtualization Technology (VTX) and virtualization Technology Directed I/O (VTd) After the disable changed to enable. Save settings to exit.

The above steps only for my own computer BIOS modification, does not mean that each reader computer BIOS is such interface, but all is the same, I think should not be stumped.
Installing the 64-bit system in VMware will be a smooth installation.

Install the Linux system below, the picture is borrowed from the network.

Just record the more important places, take centos6.5 as an example:

Production environment recommended to install English version, time zone Select Asia Shanghai, UTC can be removed first tick. Set the root password.

Then select the last item, create custom layout, and then plan how to partition the partition before creating it.

General partitioning Scheme:

/boot 128M EXT4

1.5 times times swap memory (large memory machine can be divided)

/Remaining Space Ext4

Next select the package, select Customize now Custom:

650) this.width=650; "src="/e/u261/themes/default/images/spacer.gif "style=" Background:url ("/e/u261/lang/zh-cn/ Images/localimage.png ") no-repeat center;border:1px solid #ddd;" alt= "Spacer.gif"/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/59/E7/wKiom1TuywqB6_PPAAGSAVjsXu0790.jpg "style=" float: none; "title=" A1.png "alt=" Wkiom1tuywqb6_ppaagsavjsxu0790.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/59/E4/wKioL1TuzBaAlc7VAAFgGFhKnVA669.jpg "style=" float: none; "title=" A12.png "alt=" Wkiol1tuzbaalc7vaafggfhknva669.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/59/E4/wKioL1TuzBbRQ4iyAAF8hMYRu5w108.jpg "title=" a2.png "Style=" Float:none; "alt=" wkiol1tuzbbrq4iyaaf8hmyru5w108.jpg "/>

Press Next to begin installing the system.

Check the installation package after entering the system:

Yum Grouplist

Forget to select the package, you can install Yum Groupinstall "Base"

Network configuration:

Login system after installation,Vi/etc/sysconfig/network-scripts/ifcfg-eth0 #编辑网卡配置文件

Onboot=yes,

Setup Configure IP

Service Network Restart #重启网络连接

Ifconfig #查看IP地址

Linux Learning-Install virtual machines and Linux systems