Viewing IP under window is ipconfig
View under Linux is IP is ifconfig
When the window is mounted on a virtual machine, two network cards are virtual Vmnet1 vmnet8
Use the Ipconfig under window
in VMware Workstation, there are 3 virtual switches by default, VMNET0 (using bridged networks) ,VMnet1(Host network only) andVMnet8(Nat network),
Bridged Networking (bridge mode)
in this mode, the VMware virtual operating system is like a separate host in the LAN, which can access any machine in the network. In bridging mode, you need to manually configure the virtual system with an IP address, subnet mask, and a host machine in the same network segment so that the virtual system can communicate with the host machine. Also, configure the gateway and DNS addresses to enable access to the Internet through a LAN gateway or router.
Network address Translation (NAT mode)
using NAT mode, the virtual system uses the NAT (network address translation) function to access the public network through the network where the host machine resides . In other words, the use of NAT mode enables access to the Internet in virtual systems. The TCP/IP configuration information for a virtual system in NAT mode is provided by the DHCP server of the VMnet8 (NAT) virtual network and cannot be modified manually, so the virtual system cannot communicate with other real hosts on the local area network. The biggest advantage of using NAT mode is that the virtual system access to the Internet is very simple, only the host machine can access the Internet, you do not need to configure the IP address, subnet mask, gateway, but the DNS address should be filled according to the actual situation. Add a DNS address in addition to the network card properties, you can also add it by tapping the Edit button in the Nat tab in the Virtual network editor in the virtual machine.
If you just let the virtual function on the Internet, the two modes can be, with the bridge if you have a legitimate address in the LAN, such as your ADSL cat is the leading way by the function, if it is in the unit, it will be network management to your legitimate IP (now the company is the Mac and IP binding). Now is the host and virtual machine interoperability, if your ADSL led by the function, that shut down the virtual machine DHCP, select Bridge, check whether 2 machine is assigned the same network segment IP, shut down the firewall.
Choose which method to set in the virtual machine-settings-Network adapter-Custom virtual network
How the Linux system changes the network configuration:
1.Setup
Log in as root and use the Setup command
This configuration does not take effect immediately
You must run /etc/rc.d/init.d/network restart to take effect
2. ifconfig eth0 x.x.x.x to configure the NIC
ifconfig eth0 network x.x.x.x Subnet mask configuration
This configuration will take effect immediately,
But only temporarily, log off or shutdown will revert to the original
3. Modify /etc/sysconfig/network-scripts/ifcfg-eth0
This configuration does not take effect immediately
You must run/etc/rc.d/init.d/network restart to take effect