Reprint Address: HTTP://HI.BAIDU.COM/MESSUP/ITEM/4FCB2533A1553020B2C0C5F2
Because just contact Linux, so many places do not understand. At first, there was a problem-time synchronization.
So the internet search for a relevant article, and finally sorted out the idea of synchronization success, take out to share.
= = This row is the following text:
First of all, need to have a win system machine to do NTP server, which requires a software to provide NTP services, I use the Meinberg NTP tool, can go to http://www.meinberg.de/english/sw/index.htm to download.
The NTP service will be completed and started in the next step of the installation process, but it will need to be set up.
Open the settings file through the start-All Programs-meinberg-network time Protocol-edit NTP Configuration.
The inside of the #server 127.127.1.0 and #fudge 127.127.1.0 stratum 122 lines to remove the front of the "#", then the stratum after 12 to 10, save.
Restart the NTP service.
And then to the Linux host to perform "Ntpdate Time server IP", I use the RHEL4, the implementation can be synchronized time. You can also use the "hwclock-w" command to write time to the BIOS.
In addition, if the Linux does not install NTP, you can find the NTP in your installation of the RPM installation package, extracted with the rpm command to install on it.