LoadRunner setting up the monitoring Windows system resources step

generally at the client through LoadRunner to the server pressure test, all need real-time monitoring server-side system resources, this article is mainly about how to set up in loadrunner Controller Configuring monitoring in Windows Resources can also be directly on the remote connection server to open the Task manager above or in the Control Panel to find performance counters to monitor, but in order to LR It's more convenient to put pressure on, and we still have to learn this basic configuration. The configuration here requires different settings for different server operating systems, but the basic idea is the same. This article takes the Windows system as an example and is configured as follows:

1, through the client and the server network testing, to ensure smooth communication.

2, open server-side Windows in the following two services, such as:

3, the need to change the system local policies of the server, this is very important, but also determine the client can access the server side of the key steps, specifically need to go to the management tool under the Control Panel, find the local security policy, as follows:

Note: This must be changed to Classic mode, which defaults to guest mode only.

4, in the client (you can also use this machine) to test, in the " run " field to enter the server IP address, followed by C $ That represents the system resource directory under Server C, such as:"\\192.168.96.135\C$" to see if the server can be accessed C The user name and password may need to be entered, and the server-side account and password will be OK , as shown below:

Note: If the display can access the page representation, the server-side system resources can be accessed normally, and can be monitored.

5.switch to loadrunner Controller To configure the monitoring target under Windows Resources , Specific as follows:

By discovering this, this configuration is basically similar to the performance counter configuration of the system.

6, see the configuration after the completion of the real-time monitoring record, as shown:

The above is the system resources of the target server which is monitored in real time during the stress testing process.

Turn from "https://wenku.baidu.com/view/894ddc70376baf1ffc4fadcc.html", thanks for sharing.

LoadRunner setting up the monitoring Windows system resources step