After several twists and turns, I finally installed Mac OS X 10.6.4 (10f569 ). The initial installation is 10.6. Click "software upgrade" and then update the software smoothly.
----------------------------------------------
(1) Operating System installation:
At first, I planned to install it on an old-fashioned desktop. I found that the minimum configuration was not reached, so I installed dual-system on the hard drive of Windows 7.
Disk c ntfs, after the disk is divided into a small hard disk 7 GB to put the decompressed DMG, a 20 GB hard disk for installation of MAC system. Follow the installation steps Step by step. If you are in five countries, press ENTER or F8 to enter the input line interface, and enter-x32-V, which means start with 32 bits and display details. When the message panic...: No hpets available... is displayed, copy the following kext:
Fakesmc. kext -- bootthink is already included. This kext is required to simulate the SMC components on an apple machine.
Nullcpupowermanagement. kext -- disable the power management function to solve the hpet error of intelcpupowermanagement. kext.
Openhaltrestart. kext -- solves the problem of power failure after restart/Shutdown
Platformuuid. kext
Voodoohda. kext-universal sound card
Note: At first install Mac in Windows2003. After Mac is installed, the active partition on drive C becomes invalid. Even if the active partition is reset, Windows cannot be started normally. Therefore, you need to use the Windows installation disk for repair; since windows has been in use for a long time, after Windows 7 is installed, Mac is installed, and the C drive does not need to be activated. You can access the operating system normally.
Conclusion: We recommend that you do not install dual-system Mac in Windows or earlier versions.
Http://www.jackq.com/mobile-hard-disk-to-install-x86-mac-os-x-snow-leopard-10-6-2-general-installation-guide/
Http://bbs.weiphone.com/read-htm-tid-517742.html
----------------------------------------------
(2) Sound Card:
It has been plagued by no sound and has tried the new version voodoohda. after kext262, I finally heard the sand. Because my headset is inserted on the front panel, remember to select Green Front in the output device instead of green rear (backend) in this way, you can hear clear and bright voices. However, when there is no playback, there is still a slight sound of sand. I don't know if 262 is the reason for the test version.
Download link: http://www.projectosx.com/forum/index.php? Showtopic = 355
----------------------------------------------
(3) usage: (mainly compared with Windows)
The interface display and animation effects are superior to those of windows, and the dock topic is pretty fancy. When there is a message in MSN or QQ, the automatic jump is quite shining. Of course, win7 has made great improvements in this regard;
Mail cannot set the receiving frequency based on a single mailbox, and no rule is found;
After installing the Windows Remote Desktop control plug-in, you can seamlessly connect to the Windows server;
Currently, only the public version of China Merchants Bank can be viewed on the online banking page of mobile phones;
The two systems are interconnected with Windows files. If the file cannot be copied normally, macdriver is not properly configured. We recommend that you reinstall the file;
Share a Mac with a Windows Server, set "system preference settings"-"share"-"file sharing"-"option"-use SMB (Windows) shared folder to set;
I) specific permissions (read/write, read-only, etc.) can be set separately for each folder, then windows can read Mac shared files;
Ii) Finder-go-connect to the server-SMB: // XXX. XXX, for example, SMB: // 192.168.1.123, so that the sharing of Windows operating system can be enabled.
The command key in Mac is ALT, which is equivalent to CTRL in windows;
The plus sign management setting in the lower left corner of the dashboard is quite convenient;
Procedures for comparing foreign language radio stations in iTunes