MAC OS tops Windows dual system

Source: Internet
Author: User


First of all, it is absolutely not recommended to use the Windows system on the apple, tolerance of the unfamiliar OS X, sooner or later will feel good value for money. Second, I really want to do
Erase OS X Windows This Maiduhuanzhu thing, there is a way: do bootcamp in OS X, restart after the installation of Windows in the process of selecting
Reformat the hard drive so that the most valuable OS X will be a complete farewell to you.





Finally, it pays to install Windows. Since the OS X partition was completely wiped out, the EFI information was not found at startup, so the Mac was there to white screen empty
Wait nearly 30 seconds for each boot to be like this. The workaround is to keep the OS X partition and set the Windows priority boot so that it makes no difference to the PC in use
The



Article directory:


  • There are two ways to install the WINDOWS10 system for Mac computers.
  • Tool Preparation
  • Installing WINDOWS10 on a Mac
  • Install driver installation on MAC OS that supports Windows system
There are two ways to install the WINDOWS10 system for Mac computers.
    1. The first is the use of virtual software, such as parallels 10来 implementations.
    2. The second is to use boot camp to install.


Next we will see which one is more suitable for you.

Virtual software, such as Parallels 10, allows us to test and run the Windows 10 operating system directly on it.
There is no need to install the system directly on the device, which is an advantage.

The disadvantage of this method is that the performance of the system on the virtual software is not as good as the performance directly installed on the device.
Because the system and the device are separated by a layer of virtual software. How to describe this feeling is like scratching it through clothes.

You can get the best performance by installing Windows 10 with Boot Camp. However, this means you need to configure your Mac,
So that Windows 10 can be installed on the Mac driver. When using virtual software, we don't need to configure the Mac.

Which method do you want to use? If you want a better and more direct Windows 10 experience, I suggest you choose Boot Camp.
If you are not sure if you want to install Windows 10 on your Mac, or if you want to have a more embarrassing choice,
Then I suggest you choose Parallels 10 virtual software.

However, in this article, we mainly focus on using Boot Camp to upgrade to the Windows 10 operating system, of course,
If you just want to see what kind of experience Windows10 is running on a Mac, choose Parallels 10,
Or other virtual software would be more appropriate.



Tool Preparation
    1. You need to prepare a USB flash drive and a windows10iso file in addition to your Mac-compatible boot camp.
      USB flash drive space needs to be 8GB (Apple recommends twice times more space, because boot camp needs to add drivers to ensure hardware optimization and
      System compatible);
    2. We open boot Camp. Open Launchpad, enter boot campassistant, and then open the app. The installation Wizard will provide you with the option to
      , but it will automatically help you choose, so you can go directly to the next step, which is to choose the ISO version you want. Students,
      Make sure you select the WINDOWS10 ISO file that you just downloaded;
    3. Next, Boot Camp Assistant will configure the USB flash drive and automatically copy all the correct files. This process takes some time,
      How much longer depends on how fast your USB flash is stored. At the end of this step, you will be asked to enter the user's password and add the necessary files to the installation media;
    4. It's interesting to have a place. When boot Camp Assistant asks you to allocate storage space to install WINDOWS10, it defaults
      The ratio of 50:50 is ideal, and if you use Windows frequently, it's also good for installing other software.
    5. If you don't like this distribution ratio, you can also adjust the partition yourself. Just you need to remember that in the partition created by boot camp,
      WINDOWS10 requires at least 20GB of available storage space. My advice is that the space you provide is best up to twice times if you intend to make it long-term
      with Windows10 words.

Installing WINDOWS10 on a Mac

The advantage of Boot Camp is that you don't need to do too much to get into the Windows 10 settings. After the Boot Camp Assistant wizard is complete, you will

Directly directed to the setup step.

* On the 2013 Macbook Air, the only problem I encountered was a little bit of trouble when setting up partitions in Windows.

For some reason, I had to delete all the partitions and then manually created one. Suppose the screen pops up an error message during this process.

Don't worry about it, go ahead, after this step, the installation will be smooth, I wish you success. *




In fact, the above steps are just to make a U disk. Next, that means the installation time.

Enter the Apple system, divide the computer disk into one area, the size will follow you, you will do it yourself. If you use Widnows, you will divide it.

If you just play, divide it down.

Open the Disk Utility and select the partition. And formatted as Ms DOS (FAT) format. The disk format that the system knows is just fine.

Insert the prepared USB flash drive into your computer and press and hold the option button. Two yellow disk options will appear, select the EFI boot option.

Enter the windows system installation interface and install the system to the disk just partitioned. Wait for the system installation to complete

  

Install driver installation on MAC OS that supports Windows system

After the system installation is complete, we can enter the bootcamp folder in the U disk and select the installer to install the windwos driver.

Support for Apple's drivers. Must be installed, otherwise the system is not working well on this computer. It is a windows system driver that supports Apple computers.

Everything will be completed. After the completion, if the windows system is not activated, please activate it, the activation is completed, and everything will be ok. The dual system is done like this,

If you don't want dual systems, just want windows system, then you can delete the mac OS partition, then you can,

However, there may be a small problem (as explained at the top of the article), you can do it yourself. 

 


MAC OS tops Windows dual system


Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.