Message fly Voice input computer version of the use of the tutorial

first, enable and toggle

1, ctrl+shift key can switch input method

Move the mouse to the program you want to enter, click, so that the system into the input state, you can use the "ctrl+shift key" switch Input method, to be heard to switch to fly Input method can be used.

2, Ctrl + quote key, fast switch to the flying Input method

You can also use CTRL + Quote keys to quickly switch to the flying input method.

3, Ctrl + SPACEBAR switch to the default input method

If you like, you can fly the input method set to the default, through the "CTRL + SPACEBAR" can be switched to the flying input method.

Second, the status bar description

　　Third, voice input

1. Open and Close

As shown above, click on the voice microphone to open the Voice bar (shortcut key: F6);

When the Voice bar is open, You can click the Number button (shortcut: ESC) to close the speech bar.

2. Volume calibration

When you first enable speech, you can adjust your recording device to the best state by requiring you to volume it according to the wizard prompts.

It is recommended that you use an external microphone for voice input to achieve the best recording effect.

3. Voice Input mode

Message Fly Enter the default for you to open the quiet mode, you say after a sentence, to be successful return to the words you just finished, you can continue to say a word, the process is as follows::

In general, when you use the computer for voice input, the noise will affect the recognition effect, at this time, the Input method settings-speech Setup Panel, the speech recognition scene changed to noisy.

In noisy mode, after you say a word, the flying Input method will temporarily stop recording (to shield environmental noise interference). Now you need to click on the microphone to continue the speech input process as follows:

Four, handwriting input

1. Open and Close

Click the handwriting icon on the status bar to open the handwriting panel (shortcut key: F4);

If your computer does not have a touchpad, you can only enter the mouse handwriting mode, the interface is indicated as follows:

When the flying Input method detects that your touchpad can be used, it opens the touch pad handwriting by default.

Note that when the Touchpad handwriting feature is turned on, you will not be able to move the mouse cursor through the touchpad, and you can exit the Touchpad handwriting function via the ESC key.

2. Continuous handwriting function

Flying Input method supports the continuous handwriting function, can greatly improve your handwriting input speed.