Netscreen 5XP reset and OS upgrade, netscreen5xp

Netscreen 5XP reset and OS upgrade, netscreen5xp

1. ns5xp Reset

Connect a serial port to a PC and use a Super Terminal. Set the port:

Bits per second: 9600
Data bit: 8
Parity: None
Stop bit: 1
Data Flow Control: hardware

After connecting to the firewall, press the reset button to display the screen
Configuration Erasure Process has been initiated.
Continue to press and hold it, which will be displayed in about 6 to 7 seconds.
Waiting for 2nd confirmation.
Wait for the second confirmation, release the reset key, press the Enter key, and press the reset key again to display the screen
2nd push has been confirmed
The Reset is completed after automatic restart. The default user name and password are all netscreen, and the default IP address is 192.168.1.1.

Ii. OS upgrade

Before the upgrade, it is best to back up the old OS image.

1. Create a TFTP server. The address of the TFTP server and the firewall must be in the same network segment and can access each other. Assume that the trusted IP address of the firewall is 192.168.1.1 and the IP address of the TFTP server is 192.168.1.100. Then, place the new netscreen OS on the TFTP server.

2. Back up the old OS Image
Run the following command:
Ns5xp-> save software from flash to tftp 192.168.1.100 ns5xp. 4.0.0r6.0

Ns5xp. 4.0.0r6.0 is the name of the file to be saved.

3. Refresh the OS image to the firewall
You can use the web interface or CLI to refresh the OS. The web page is very simple and will not be described here.
Command:
Save software from tftp 192.168.1.100 ns5xp. 5.0.0r9.0 to flash

Ns5xp. 5.0.0r9.0 is the file name of the new OS image to be refreshed. A large string of symbols is displayed after the command is executed, and information such as whether the file downloaded from tftp is successful is displayed:
Save to flash. It may take a few minutes... update new flash image (013b5780, 24
82467)
Platform = 10, cpu = 9, version = 16
Offset = 20, address = ad6000, size = 2482421
Date = 319a0050, time = 28008000, cksum = 8fad76ab
Program flash (, 242.1667 )...
++ Done
Done
Complete.

After the restart, the new OS version is available.

Note: show Program flash (, 242.1667 )...
You may have to wait for a long time to complete the operation. Do not restart the instance.