NFC setup and Mount mounting in Linux

Article Title: NFC settings and Mount mounting in Linux. Linux is a technology channel of the IT lab in China. Some basic categories, such as desktop applications, Linux system management, kernel research, embedded systems, and open-source systems, are involved in debugging communications between PCs and arm2410 due to improper modification of NFC server settings, the server cannot be opened. Run the following command in the terminal window to solve the problem:

Cd/etc

Ls

Vi exports (modified to the correct configuration) Exit and save

Cp exports. bak

Y

Open Network Settings select nfs click stop OK and then start to confirm

Click solve NFC server issues.

Communication between PC and arm2410

1) after setting the NFC server according to the instructions, enter minicom in the root Terminal

2) power on the Development Board

3) re-open a root terminal and set the ip address

Ifconfig eth0 192.168.0.1

4) the same ip address is set on the Development Board terminal.

Ifconfig eth0 192.168.0.1

5) mount 192.168.0.1:/arm2410dev/host

Cd host

Set successfully.