Nokia 6260 read mmccard Test

Keywords: Nokia 6260 RS-MMC card mmccard

Nokia 6260 uses a RS-MMC card, which is really bad for me. Because I have two mmccards at hand, a 32 m, a 128, after buying Nokia 6260 will not come in handy, and the price of RS-MMC card is too expensive, it is not cost-effective to buy it.Http://www.9499.net

I just want to try to use this mmccard on 6260. In fact it is also very simple, shut down, open the card warehouse, take out the RS-MMC, plug in the mmccard. Because the mmccard is half longer than the RS-MMC, the card can not close the warehouse, can only be inserted with hand pressure on the edge of the battery, the back cover can not be covered. Note that at this time, the metal contacts of the mmcka and the contacts of the seat have been fully connected. This is enough!Http://www.9499.net

Okay, boot... you can seeProgramThe icon is displayed on the menu, so there is no problem in running the program!Http://www.9499.net

It indicates that the RS-MMC and MMC are fully compatible, and the biggest difference is that the appearance size is different. If the 6260 card store is designed to be compatible with the two cards, it is a pity!Http://www.9499.net

Next, I also did a hot swapping test, that is, unplug the mmccard and change it to another one. The result shows that the program menu is not refreshed and an error occurs when running the program.Http://www.9499.net

Please note that you should always hold down the mmccard during the operation to avoid Card Contact disconnections. Before hot swapping, you must close all programs to avoid accidents. Disclaimer: this operation has certain risks and is at your own risk!