OpenWrt Configuration opkg.conf

A foolish man is tired from his work.
With OpenWrt for more than a year, the data transmission has been used wget from the external webserver take. This way I personally think it's easy.
But debugging more, write large-scale program, always this is a bit of trouble.

The same is true for installing software.

A few days ago inadvertently saw opkg.conf, think this can let less input some address.

Change the opkg.conf file such as the following

 [email protected]:/etc# cat opkg.conf dest root/dest ram/tmplists_dir ext/var/opkg-listsoption Overlay_ Root/overlaysrc/gz barrier_breaker_base http://192.168.202.110/base#src/gz barrier_breaker_base/http Downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/base#src/gz Barrier_breaker_luci/HTTP Downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/luci#src/gz barrier_breaker_management http ://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/management#src/gz Barrier_breaker_ Oldpackages http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/oldpackages#src/gz Barrier_breaker_packages http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/packages# Src/gz barrier_breaker_routing http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/ Routing#src/gz Barrier_breaker_telephony http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/ Packages/telephony 

For example, see the following: Running the installation

[email protected]:/etc# opkg update[email protected]:/etc# opkg install nano[email protected]:/etc# opkg remove nano

OpenWrt Configuration opkg.conf