Packet Tracer 5.0 Experiment (i) basic configuration and management of switches

Packet Tracer 5.0 Experiment (i) basic configuration and management of switches

First, the experimental target

Master the configuration and management of switch basic information

Second, the principle of technology

There are two basic ways to manage switches: in-band management and out-of-band management.

• The console port management switch through the switch is out of band management: This management method does not occupy the network port of the switch, and the first configuration switch must be configured with the console port.

• In-band management via remote telnet, dialing, etc.

Third, the switch command line operation mode

Mainly include:

User Mode switch>

Privileged Mode switch#

Global configuration mode Switch (config) #

Port mode Switch (config-if) #

Iv. Steps of the experiment

1. Experimental topology

650) this.width=650; "src=" http://pic002.cnblogs.com/images/2012/370046/2012071310322066.jpg "style=" margin:0px; padding:0px;border:0px; "/>

2, switch basic configuration command

A. Enter privileged mode

Switch>enable//en=enable

switch#

B. Go to global configuration mode

Switch#configure Terminal//conf T=configure terminal

Enter configuration commands, one per line. End with cntl/z.

C. Enter switch port view mode

Switch (config) # interface fastethernet 0/1//int f0/1=interface fastethernet 0/1

Switch (config-if) #

D. Configure switch port speed

Switch (config-if) #speed?

Operation100 force of ten Mbps Operationauto Enable AUTO Speed Configuration

Switch (config-if) #speed 100

E. Configuring switch port Duplex mode

Switch (config-if) #duplex?                               

Auto Enable Auto Duplex configurationfull Force full duplex operationhalf Force Half-duplex operation

Switch (config-if) #duplex full

F. Return to the upper-level mode

Switch (config-if) #exit

Switch (config) #

G. Direct return to privileged mode

Switch (config-if) #end

switch#

%sys-5-config_i:configured from console by console

switch#

H. Viewing switch version information

Switch#show version

650) this.width=650; "src=" Http://common.cnblogs.com/images/copycode.gif "alt=" Copy Code "style=" margin:0px;padding:0px ; border:none; "/>

cisco ios software, c2960 software  (c2960-lanbase-m),  Version 12.2 (+) FX,  RELEASE SOFTWARE  (FC1) copyright  (c)  1986-2005 by Cisco Systems,  Inc.compiled wed 12-oct-05 22:05 by pt_teamrom: c2960 boot loader   (C2960-HBOOT-M)  version 12.2 (25r) fx, release software  (FC4)  System  returned to rom by power-oncisco ws-c2960-24tt  (RC32300)  processor  ( REVISION C0)  with 21039K bytes of memory. 24 FastEthernet/IEEE  802.3 interface (s) 2 gigabit ethernet/ieee 802.3 interface (s)  63488K bytes  of flash-simulated non-volatile configuration memory. base ethernet mac address       :  0040.0b69.8831motherboard assembly number     : 73-9832-06power supply part number        :  341-0097-02Motherboard serial number       :  foc103248mjpower supply serial number      :  dca102133jamodel revision number           :  B0Motherboard revision number     : C0Model number                      : WS-C2960-24TTSystem serial number             : foc1033z1ey  --more--... Configuration register is 0xf

650) this.width=650; "src=" Http://common.cnblogs.com/images/copycode.gif "alt=" Copy Code "style=" margin:0px;padding:0px ; border:none; "/>

I. Viewing the configuration information that is currently in effect

Switch#show running-config

650) this.width=650; "src=" Http://common.cnblogs.com/images/copycode.gif "alt=" Copy Code "style=" margin:0px;padding:0px ; border:none; "/>

Building configuration ...  Current configuration:1033 bytes!version 12.2no service Timestamps log datetime MSECNO service timestamps debug datetime MSECNO Service Password-encryption!hostname Switch!!! Interface FASTETHERNET0/1 Duplex Full speed 100!interface fastethernet0/2!interface fastethernet0/3!interface Fastethernet0/4!interface FASTETHERNET0/5--more--...!! End

650) this.width=650; "src=" Http://common.cnblogs.com/images/copycode.gif "alt=" Copy Code "style=" margin:0px;padding:0px ; border:none; "/>

J. Help Information

①switch#?

650) this.width=650; "src=" Http://common.cnblogs.com/images/copycode.gif "alt=" Copy Code "style=" margin:0px;padding:0px ; border:none; "/>

Exec commands:  <1-99>      session number to  resume  clear       reset functions  clock        Manage the system clock  configure    enter configuration mode  connect     open a  terminal connection  copy        copy from  one file to another  debug       debugging  functions  (see also  ' undebug ')   delete       Delete a file  dir         list files  on a filesystem  disable     turn off privileged  commands  disconnect  Disconnect an existing network connection  enable       Turn on privileged commands  erase        erase a filesystem  exit        exit  from the exec  logout      exit from the  EXEC  more        Display the contents  of a file  no          disable  Debugging informations  ping        send echo  messages  reload      Halt and perform a  Cold restart  resume      resume an active network  connection  setup       run the setup command facility --more-- 

650) this.width=650; "src=" Http://common.cnblogs.com/images/copycode.gif "alt=" Copy Code "style=" margin:0px;padding:0px ; border:none; "/>

②switch#co?

Configure Connect Copy

③switch#copy?

Flash:copy from Flash:file system ftp:copy to Ftp:file system Running-config Copy from Curren T system configuration Startup-config Copy from the startup configuration tftp:copy from Tftp:file system

Packet Tracer 5.0 Experiment (i) basic configuration and management of switches