Photoshop using the Smudge tool to create a hand-painted painting effect tutorial

Source: Internet
Author: User

For your Photoshop software users to elaborate on the use of smudge tools to make hand-painted painting effect of the tutorial.

Tutorial Sharing:

Final effect Diagram

Figure 00

1. Prepare photos

If you just convert a picture to a drawing effect, it usually feels like it works. This is because the picture shows the real world, and painting is the idealized world that is processed by the human brain.

The difference between reality and ideal is subtle and important. Painting is intentional, and every stroke has an intention. Photographs, by contrast, show the real world objectively, whether the world is ugly or not.

So in the process of getting ready to turn pictures into paintings, you need to consider the above. So before you start to turn to the painting effect, do some processing of the photos.

Step 1

Take a look at the pet photo below, and you'll find two places to adjust: two straps and too close to the puppy's chair.

Figure 01

Step 2

Select the Polygon Lasso tool, create a selection along the foot profile of the Chair, and select Edit > Fill to use content recognition.

Figure 02

After you click OK, PS will automatically select similar pixel fills based on the surrounding selection and background. The effect is shown in the following illustration.

Figure 03

Apply the same method to dispose of the tape, after processing, press Ctrl+d to cancel the selection.

Figure 04

Step 3

The dog's nose is a bit dirty in the picture, and the stains and spots are distracting, so it's also going to be erased. The Healing Brush tool is used here.

Figure 05

Step 4

Adjust the puppy eye section below. Add a new layer, named "Black Eyes", the use of soft black brush, the eye peripheral darkened. It looks a little scary now, but it's good to be back.

Figure 06

Step 5

Select the Pen tool, draw a crescent-shaped, then fill the brown #c07c3e. The outline of the new Iris is not too much to mind, as it will not be apparent in the process of being portrayed.

Figure 07

Step 6

To make the iris look more lifelike, double click on the eye shape layer, and then set the inner shadow effect, set uncheck use Global light, angle -79°, size 10 pixels.

Figure 07

Set inside glow, opacity 53%, source Center, block 15%, size 8 pixels.

Figure 08

Sets the image overlay, blending mode is brightness, opacity 48%, scaling 65%.

Figure 09

Sets the projection, blending mode to screen, color #d79356, not using global light, angular -119°, distance 4 pixels, size 4 pixels.

Figure 10

After the layer styles are set, the effect is shown in the following illustration.

Figure 11

Step 7

Select the Move tool, and then press ALT to drag so that you can copy the Iris shape layer of the eye.

Figure 12

Step 8

Usually, the painting color will be more saturated than the photo. Select Layer > New adjustment layer > Natural saturation to set natural saturation of +88, so that the color saturation of the photo will be deeper.

Figure 13

Step 9

A puppy's nose can add a pink hue. Select Layer > New adjustment layer > Hue/saturation to set hue 359, saturation 33, lightness-33.

Figure 14

Step 10

Click the mask thumbnail for the hue/saturation adjustment layer, and then select Fill Black to hide the color effect.

Figure 15

Step 11

Select the Brush tool, double-click the foreground color, and choose white. Then right click on the canvas, bring up the Brush property panel, set the size to 40 pixels, hardness 50%, brush style as shown in the following figure.

Figure 16

Use a white brush to control the color adjustment effect in the dog's nose position. To confirm the operation, the operation position is for hue/saturation adjustment layer mask, reduce the adjustment layer opacity to 68%.

Figure 17

Step 12

Below to improve the blue color effect of the carpet, add hue/Saturation adjustment layer, select the Drop-down menu set color channel for cyan, set hue-29, saturation +60, brightness +21.

Figure 18

Step 13

Press Alt+ctrl+a to select all layers, and then select Layers > Smart objects > Convert to Smart Objects, and the name new layer is "pet photo retouching."

Figure 19

Step 14

When the image details are removed, the hand-painted results will be much better. So choose Filter > Blur > Smart blur, set radius 2 pixel, valve value 50, high quality.

Figure 20

Step 15

Choose Filter > Liquefaction, select the expansion tool, and then adjust the brush size to match the size of the dog's eyeball, then point a few, then the eyeball is bigger. All two eyeballs do the same thing.

Figure 21

Step 16

A small dog's nose looks a bit unnatural in a photo. Or in the Liquefied window, select the Forward deformation tool, adjust the shape of the nose, and then the nose has more vertical creases.

Figure 22

2. Basic smear

Now the photo has been processed and can be applied. Here we select the Smudge tool for operation.

Step 1

Reduce the opacity of the photo layer to 15%, which makes the photo almost invisible, creating a new layer named "Basic Smudge."

Figure 23

Step 2

In the toolbar's Blur tool's Triangle drop-down menu, select the Smudge tool. Open the Brush panel, in the upper right corner of the gear out of the menu, select the M brush in the menu.

Figure 24

When you select the M brush, the following dialog box pops up and clicks the Append m brush to the brush list.

Figure 25

Step 3

In the Brush preset panel, drag the scroll bar to the bottom and select "Soft Paint crayon". Then go back to the Brush panel, click on the shape dynamics, set the minimum diameter 35%, the size jitter and the angular jitter are all by default.

Figure 26

Check transfer, strength jitter control Select pen pressure.

Figure 27

Step 4

Select the Smudge tool, and then check "sample all layers". This is a useful way to sample all layers, even if they are almost invisible or transparent, and can be sampled.

Figure 28

So along the edges of the image, you can use the Smudge tool to produce brush marks that can be sampled from the picture, but not actually drawn on the picture.

Figure 29

After you understand the principles above, smear the dog's fur along the way. Need to primarily not exceed the edge of the puppy itself image.

Figure 30

Step 5

Add a new layer to the image layer, named background smear. This layer will draw elements such as backgrounds.

Figure 31

The difference between a background smear and a basic smudge is the size of the brush. Although the background will be relatively large, but also will contain some details. The brush size selected here is 200 pixels to 250 pixels.

Figure 32

Step 6

Continue to smear the background element. Smear along the edges of the main brush marks, be careful not to paint out of bounds, or you will inadvertently make the original traces far away.

Figure 33

3. Detail smear

The basic smear has been completed. The following is the time to deal with the details, the details of a good deal to make the work look more natural, more like a painting, and not just a simple PS operation. These important features, such as noses and eyes, require extra careful handling.

Step 1

Temporarily hides the base smear layer and background smear layer. Add a new layer, named "Smudge Details", and set layer opacity to 75%. Set the Smudge tool to a hardness of 75% and a size of 20 pixels. Then carefully draw a clearer smear effect according to the details of the nose.

Figure 34

Step 2

The option to sample all layers is turned off and the tick refers to painting. The finger painting function allows the color to be painted on the canvas first and then dragged and applied. Set the color to black and the brush size to 10 pixels, narrowing the shadow around the iris. Change the color to #a86f2d, then highlight the lower left part of the iris.

Figure 35

Step 3

Close your finger painting, and then check all layers for sampling. Sets the brush size to 5 pixels and uses a short stroke to pull the light out of the pupil.

Figure 36

Step 4

Then use your finger painting to add some light specular reflections to the top right of the eyeball. This will make people feel that the eyeball is moist and shiny.

Figure 37

Use the same method to process the other eye. Notice that the two eyes should be consistent in the direction of the light, making it feel like two eyes are attracted to the same light source.

Figure 37

Step 5

To make the fur more realistic, get a stroke of your own. Create a new canvas, 300dpi, 100*100 pixels.

Figure 38

Select the flexible particle pen in the brush preset, set the size of 5 pixels, and then randomly draw a few close to the black spots.

Figure 39

Select Edit > Custom brush Preset To rename the brush to "brush". This will save the brush and find it at the bottom of the Brush preset panel.

Figure 40

Step 6

Switch back to the main canvas, select the Smudge tool, apply the brush just made, set the size of 25 pixels, hardness 75%. Check all layers to sample, close finger painting. Add a new layer, "hair smear", in the transition area of the fur brush gently with the bristles, creating small clumps of hair.

Figure 41

In the process of smearing, you will find that you need to adjust the angle. The easiest way to do this is to right-click directly and drag the direction label directly in the pop-up menu.

Figure 42

Step 7

Next, create a new layer "individual", the use of flexible particles round pen strokes, set the size of 4 pixels, close to all layers sampling, hook refers to painting. Set hardness 95%, painting color is #dfdbd8. Use a smooth, quick brush to draw the whiskers, eyebrows, and hair on the ear alone.

Figure 43

4. Final modification

We want the hand-painted effect has been basically out, leaving the overall effect of the adjustment. Although this time is not very necessary, but the effect will be better after the fix.

Step 1

Create a new layer "white" above the background layer and choose white for fill.

Figure 44

Step 2

Add a new layer to the top of the layers panel, named "Edge smear." Select the soft oil crayon again, set the size of 150 pixels, check all the layers sampling, close finger painting. Apply between the white background and the painting area with the canvas you just set.

Figure 45

So the edges look softer and more like a picture.

Figure 46

Step 3

Press ALT to select Layers > Merge visible layers, create merged layers, name "merge", set blending mode to soft light, scatter light, reduce layer opacity to 50%, and reduce the effect.

Figure 47

Step 4

Create a new layer above the merged layer, named "Canvas." Select Fill to 50% gray. Then set the layer blending mode to overlay, this is gray will be completely invisible.

Figure 48

Step 5

Select Filter > Filter gallery, click on the Texture folder, and select texture. Set the texture to canvas, zoom 132%, highlight 4, light.

Figure 49

This will add a canvas texture effect to the screen, and it will increase the overall texture, not just the photo with the filter.

Figure 50

Step 6

A slightly yellow white will make the canvas look more realistic, add color overlay, color selection #fff9e8, blending mode to multiply the bottom.

Figure 51

Final effect Diagram

Figure 52

Okay, the above information is small compiled to you photoshop this software users of the detailed use of the painting tool to make hand-painted canvas effect of the full content of the tutorial to share, you see the users here, Xiao-bian believe you are now very understanding of the processing method, So you guys now go to the tutorial of the small series to draw it yourself.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.