PS combined with AI to create multi-layer stacked color paper-PS tutorial

It can also be completed in the PS, but the process is a little complicated. you need to make multiple layers of text first, with a slight change in the color and size of each layer. Then add a projection to each layer to make a three-dimensional effect, and then add the background and other decorations to the whole layer. This can also be done in PS. However, the process is a little more complex and requires multi-layer text first, the color and size of each layer are slightly different. Then, add the projection and other three-dimensional effects to each layer, and then add the background and other decorations as a whole.
Final effect



1. Open AI and create a new document: 900*600 pixels, the color mode is RGB, the raster effect is the screen, and click OK.

2. we use a text tool to write down the text or symbols we like on the document. we recommend that you use a bold stroke in the font. the color is # ed0072.



3. this step is actually complicated. you have to repeat it several times. please be patient. Select the text, select "object"> "extension", select "object" and "fill", and click "OK.



4. select an object> path> offset path to draw the first profile.



5. set the color of the curve group to # ff0051.



6. select the first profile and select object> path> offset path. Draw the first profile, with the displacement of 5 and other settings unchanged. Click "OK" and set the curve group color to # fe2514.



7. Repeat this step and the displacement is 10, 15, 20, 25, and 30 at a time. we will see the following results.



8. the color ranges from the first layer to the lowest layer.

Then we open the PS, and create a 900*600 pixel document with a color pattern of RGB and a resolution of 72 pixels/inch. copy and paste the path from AI to PS, select "smart object" as the pasting item ".



9. to facilitate differentiation, we name the layers of these intelligent objects from top to bottom.



10. create a blank layer on top of Profile 1, name it "text layer Elevation", and load the "text layer" into the constituency, fill in the color (the color is the same as the color of the text) on the "text layer Elevation", select the selection tool, press the Alt key and press the arrow key down once, and then cancel the selection, fill the layer style.



11. use the same method to make an elevation of each layer. The relationship between the perspective and thickness of each layer must be changed. Because of the elevation effect, the positions of each layer must be moved accordingly, as shown in.



12. create a blank layer on the background layer, name it "background", and pull a gradient from top to bottom. color: #7e8892, #484f57. Then, use a filter to add the color.



13. The final effect is achieved by adding ribbons and embellishment.