PS to the Sky plus a white cloud

Original

Final effect Diagram

The specific synthesis steps are as follows:

1, open to add blue sky and white clouds photos. (as shown in figure I)

Figure I

2, select the tool panel "Magic Wand", click the Sky section. (as shown in Figure II)

Figure II

3, click on the Sky section, only selected most of the sky, there are two ways to choose All the sky: First, hold down the "shift" button many times click on the rest of the sky, until all the sky selected. Second, select "Choose a similar" item in the menu bar to select the rest of the sky. (Figure III)

Either way, be aware of: first, it is best to enlarge the picture so that you can see clearly, the choice of the sky are selected, otherwise the junction with the Blue sky will be mixed unnatural; the second is the "magic wand" of "tolerance" not too big, too big may choose some should not be selected parts. If you choose a section that should not be selected, hold down the ALT key and use the Lasso tool on the tools panel to cancel the selection.

Figure Three

4, the sky all selected. (as shown in Figure IV)

Figure Four

5, and then open a picture you want to add blue sky and white clouds. (as shown in Figure V)

Figure five Category:

• PS Composite Picture Tutorial