Repair command in the context menu of local connection for network connection

Comments: There is a "Repair" command in the context menu of the local connection of the network connection, which is rarely used at ordinary times. In fact, this "Repair" function may play a major role in some cases. We will introduce the two applications below.1. clever solution of ADSL disconnection

Nowadays, many users access the Internet through ADSL. If you access the Internet frequently, it may fail when the connection is interrupted, and check whether the external lines are smooth. In this case, try the repair operation. Open the Properties window of the network neighbor, right-click the local connection to the ADSL Moden connection, and select "Repair" in the pop-up menu ".

After the repair is successful, open the Device Manager to unmount the NIC, right-click in the blank area and select "Scan hardware changes" to install the NIC again. After the NIC is automatically installed, re-dial the internet, the disconnection will disappear.

2. Obtain the IP address again.

In the LAN, DHCP is usually used to automatically assign IP addresses for ease of management. However, if you want to obtain an IP address again, but do not want to restart the computer. At this time, you only need to right-click the local connection and then right-click and select "Repair". This will release the currently occupied IP address and apply for a new IP address from DHCP.