Soft RAID 1 replace bad disk 1. buy a hard disk of the same size. install the new hard disk on the machine. partition the hard disk and set the t type to: & quot; fd & quot; (the new drive letter is/dev/sdb # fdisk/dev/sdb4. run & quot; partprobe & quot; let the kernel reload the partition table 5. stop RAID1 mounting... soft RAID 1 replace bad disk 1. buy a hard disk of the same size. install the new hard disk on the machine. partition the hard disk and set the t type to "fd" (the new drive letter I added is/dev/sdb # fdisk/dev/sdb 4. run "partprobe" to allow the kernel to reload the partition table. stop RAID1 mounting # umount/dev/md0 6. remove the damaged device # mdadm/dev/md0-r/dev/sdxx 7. view the status of the current array: # more/proc/mdstat 8. for actual operations, pay attention to two points: first, before adding The new disk is correctly partitioned. The second is to replace/dev/sdb1 with the device name of the added device. # Mdadm/dev/md0-a/dev/sdb1 9. check the current array status: # more/proc/mdstat unused devices: [Root @ server13/] # more/proc/mdstat Personalities: [raid1] md0: active raid1 sdb1 [2] sdc1 [1] 976759936 blocks [2/1] [_ U] [> ................... .] recovery = 0.1% (1366208/976759936) finish = 107.0 min speed = 151800 K/sec 10. you can see that the data is being synchronized.
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.
