Residential broadband wireless router configuration

With the rapid development of wireless networks, wireless networks are widely used. For wireless network users in the residential area, I have explained some tips on the configuration of residential broadband wireless routers.

In addition to broadband access through virtual dialing such as ADSL, most families currently use residential LAN-type broadband access. How can we combine wireless networks to make Internet access more free? You can still use a wireless router. It is very convenient and practical. In addition to your own computer, when a friend comes to play, his notebook can also access the Internet without any need to set up.

When using residential broadband access, the residential broadband wireless router is configured as follows: regardless of the residential broadband, there is a network cable to the door or even the house, connect the network cable to the WAN port configured by the residential broadband wireless router, the home computer is connected to the LAN port of the Wireless Broadband Router with a network cable. A computer with a wireless network card can directly search for the wireless network established by the Wireless Broadband Router. Then we can start sharing work.

On a computer connected to a Wireless Broadband Router, enable Internet Explorer and enter http: // 192.168.1.1 (different wireless routers have different default addresses. Refer to the instructions ), go to the Web management interface of the Wireless Broadband Router. In the WAN port setting of the network parameter, all types of residential bandwidth bound with IP addresses, If the ISP has been assigned a fixed IP address, you can set the WAN port connection type to "static IP" and enter the corresponding IP address, subnet mask, gateway, DNS server, and other parameters.

For example, ehomewidth, Unicom broadband, Netcom broadband, and Great Wall broadband are IP addresses dynamically allocated by ISPs. You can set the WAN port connection type to "Dynamic IP Address ", after saving the settings, You can automatically obtain parameters such as IP address, subnet mask, and gateway.

Because the residential broadband wireless router is configured to enable the routing function by default, as long as the IP address of the computer you want to access is set to 192.168.1.n (n is 2 ~ The default gateway address is 192.168.1.1, and enter the correct IP address of the DNS server. For example, the DNS server of Guangzhou Telecom is 202.96.128.68, as long as DHCP is used on the computer to automatically obtain the IP address, you can obtain the required parameters from the Wireless Broadband Router, the computer can access the Internet, it is very convenient, interested friends may wish to try.