Router Default gateway Settings tutorial

in network settings, such as multiple routers in series or to strengthen the router security settings, you will be changed to repair the default gateway. In general, the modification of gateways are required to enter the router settings to operate, under the small set up mainly for everyone to introduce the next gateway how to set up, there is a need to use friends, together to learn about it.

Gateway in English name is Gateway, also known as the Network Connector, protocol converter. The gateway realizes network interconnection above network layer, it is the most complex network interconnect device, it is only used for different network interconnection of two high-level protocols. In many home LANs today, the use of the road is to access the network, so usually refers to the gateway is the default IP address router, the following is the router default gateway setup steps.

1, first in the browser to open the router default login IP address (default gateway address: Generally is 192.168.1.1 or 192.168.1.0, specific to the Router nameplate mark), and then enter the router Administrator account password login Router settings interface, as shown.

2, login router to set the interface, click on the left of the "Network parameters"-"lan Port settings" after the right IP address is the current default gateway address, such as you see the Tp-link router default gateway is 192.168.1.1, if you want to modify to other addresses, can be 192.168.0.1 or 192.168.1.10 can be, as long as not with other devices IP address conflict can, after the modification is completed, click "Save" can be.

Router Default gateway Settings

Note: Modifying the router default gateway will cause the router to reboot.