Samsung A5100 (2016) How to install/Uninstall SIM card

Note: The equipment supports China Unicom, Chinese Mobile, telecom 4G Network, supported by the SIM card for Nano-sim card. Note: SIM card is provided by China Mobile, Usim card is provided by China Unicom, UIM Card is provided by Chinese Telecom.

1 slot position as shown above.

2 will take the Kari into the small hole on the SIM card to eject the Cato.

3 gently pull the sim card out of the SIM card slot.

4 Place the Golden contact of the SIM, Usim or UIM card into the SIM card. Place the SIM, Usim, or UIM card on slot 1 and place the SIM, Usim, or UIM card on slot 2.

Attention:

· SIM card slot 2 can also be used as a memory card slot. However, SIM, Usim, or UIM cards and storage cards cannot be placed at the same time. • Dual-card slots in mainland China, you cannot use two telecommunication cards at the same time. • When you insert a card and a SIM card from another service provider, the card is automatically connected to the 4G network and the other SIM card is connected to the 2G network. If you set another SIM card to connect to the 4G network, the carrier card will be closed.

5 Reinsert the SIM card into the SIM card slot.

6 If you need to remove the SIM card, insert the Kari into the keyhole on the SIM card to eject the card, gently pull the sim back out of the SIM slot, remove the SIM, Usim, or Uim cards, and then reinsert the SIM into the SIM Bay slot.

More than 7 for the SIM card type diagram.

All right, that's a little set up for you. About Samsung A5100 (2016) Installation/uninstall SIM card operation method, because it is a dual-card, so the installation method and Tanka will have some differences, of course, there is a size of the problem in the end of the article in the last small series for you have introduced.