various reasons for the failure of the brush machine can not be turned on a workaround.
Related Downloads
Samsung Galaxy Note 4 (N9100 Public Edition dual 4G) firmware download: Click to download
Samsung Galaxy Note 4 (N9100 public version 4G) Brush machine tool Download: Click to download
Note: This firmware is for Android 5.0
Enter download mode • Open the downloaded Brush Tool Pack and install the driver under the Driver folder.
• Remove the phone battery for a few seconds, then mount, while holding down the volume key +home + Power key , the exclamation point interface and then press the volume on the key , confirm access, and then insert the data cable connected to the computer.
Start the brush machine
Running the Brush tool Odin3.exe
Confirm whether the phone is connected as shown below ;
Click the BL button to select the BL_N9100ZCU1BOC5_CL4582906_QB4515817_REV00_user_low_ship_MULTI_CERT.tar.md5 under the firmware folder;
Click the AP button to select the AP_N9100ZCU1BOC5_CL4582906_QB4515817_REV00_user_low_ship_MULTI_CERT.tar.md5 under the firmware folder;
Click the CP button to select the CP_N9100ZCU1BOC5_CL4582906_QB4515817_REV00_user_low_ship_MULTI_CERT.tar.md5 under the firmware folder;
Select Good after click start to start the brush machine;
The brush machine is completed as follows:
Disconnect the data cable and reboot directly